Moxa VPort 26 VPORT 26 User Manual
Product codes
VPORT 26
2
w w w. m o x a . c o m
i n f o @ m o x a . c o m
IP Surveillance
Dimensions
Unit: mm (inch)
68 (2.68)
119.52 (4.71)
Ø144.88 (5.7)
152.2 (5.99)
Ø106.96 (4.21)
Ø135
(Ø5.31)
90°
45°
60 (2.36)
40 (1.57)
M25x1.5
Top View
Side View
Video
Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video Outputs: Via Ethernet
Video Streams: Maximum of 3 video streams (2 x H.264, 1 x MJPEG)
Video Resolution and FPS (frames per second):
Video Outputs: Via Ethernet
Video Streams: Maximum of 3 video streams (2 x H.264, 1 x MJPEG)
Video Resolution and FPS (frames per second):
NTSC
PAL
Size
Max. FPS
Size
Max. FPS
QCIF
176 x 112
30
176 x 144
25
CIF
352 x 240
30
352 x 288
25
VGA
640 x 480
30
640 x 480
25
4CIF
704 x 480
30
704 x 576
25
Full D1
720 x 480
30
720 x 576
25
SVGA
800 x 600
30
800 x 600
25
Video Viewing:
• DynaStream™ supported for changing the video frame rate
automatically
• 8 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 10 simultaneous unicast connections
PTZ: Digital PTZ with 4X zoom
Audio Inputs: 1 line-in or mic-in with 2-pin terminal block connector
Audio Outputs: 1 line-out with 2-pin terminal block connector
• DynaStream™ supported for changing the video frame rate
automatically
• 8 privacy mask areas provided
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 10 simultaneous unicast connections
PTZ: Digital PTZ with 4X zoom
Audio Inputs: 1 line-in or mic-in with 2-pin terminal block connector
Audio Outputs: 1 line-out with 2-pin terminal block connector
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS,
Modbus/TCP, 802.1X, SSH, HTTPS
Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS,
Modbus/TCP, 802.1X, SSH, HTTPS
Ethernet: 1 10/100BaseT(X) Ethernet port, RJ45 connector
GPIO
Digital Inputs: 1, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Output: 1, max. 24 VDC @ 1A
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Output: 1, max. 24 VDC @ 1A
LED Indicators
STAT: Indicates if the system is booted properly or not
Network: 10 Mbps or 100 Mbps
Power: Power on/off
DIP Switch: To turn the LED light on/off
Network: 10 Mbps or 100 Mbps
Power: Power on/off
DIP Switch: To turn the LED light on/off
Local Storage
SD Socket: Standard SD socket (SDHC)
Power Requirements
Power Input:
• VPort 26: 1, 12/24 VDC or 24 VAC
• VPort P26: Power-over-Ethernet (IEEE 802.3af)
Power Consumption: Max. 11.7 W
• VPort 26: 1, 12/24 VDC or 24 VAC
• VPort P26: Power-over-Ethernet (IEEE 802.3af)
Power Consumption: Max. 11.7 W
Physical Characteristics
Housing: Metal, IP66 rated for rain and dust protection
Dimensions: 149 mm (diameter) x 120 mm (height)
Installation: Surface mounting, or outdoor mounting with accessories
Dimensions: 149 mm (diameter) x 120 mm (height)
Installation: Surface mounting, or outdoor mounting with accessories
Security
Password: User level password protection
Filtering: By IP address
Authentication: 802.1X
Encryption: HTTPS, SSH
Filtering: By IP address
Authentication: 802.1X
Encryption: HTTPS, SSH
Alarms
Intelligent Video: Camera tamper (Pending)
Video Motion Detection: Includes sensitivity settings
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP as event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting
customized alarm actions
Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
Video Motion Detection: Includes sensitivity settings
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP as event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting
customized alarm actions
Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
Environmental Limits
Operating Temperature: -40 to 50°C (-40 to 122°F )
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1
EMI: FCC Part 15, CISPR (EN 55022) class A
EMS:
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC60068-2-27
Freefall: IEC60068-2-32
Vibration: IEC60068-2-6
Vandal Resistance: EN 62262, IK10 level
EMI: FCC Part 15, CISPR (EN 55022) class A
EMS:
EN 61000-4-2 (ESD), Level 3,
EN 61000-4-3 (RS), Level 3,
EN 61000-4-4 (EFT), Level 3,
EN 61000-4-5 (Surge), Level 3,
EN 61000-4-6 (CS), Level 3,
EN 61000-4-8,
EN 61000-4-11
Shock: IEC60068-2-27
Freefall: IEC60068-2-32
Vibration: IEC60068-2-6
Vandal Resistance: EN 62262, IK10 level
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period: 3 years
Details: See www.moxa.com/warranty
Details: See www.moxa.com/warranty
Minimum Viewing System Requirements
CPU: Pentium 4, 2.4 GHz
Memory: 512 MB of memory
OS: Windows XP/2000 with SP4 or above
Browser: Internet Explorer 6.x or above
Multimedia: DirectX 9.0c or above
Memory: 512 MB of memory
OS: Windows XP/2000 with SP4 or above
Browser: Internet Explorer 6.x or above
Multimedia: DirectX 9.0c or above
Software Development Kit
VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API
library for customized applications or system integration for third-party
developers (the latest version of SDK is vailable for download from
Moxa’s website).
Standard: ONVIF
library for customized applications or system integration for third-party
developers (the latest version of SDK is vailable for download from
Moxa’s website).
Standard: ONVIF