Panasonic PT-AE8000U PTAE8000U User Manual

Product codes

PTAE8000U

PT-AE8000

Full High-Definition Home Cinema Projector

As of August 2012

SFL12M016

1 3 / 1 3

Notes on projector placement and operation

The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.

Never place objects on top of the projector while it is operating.

Make sure there is an unobstructed space of 100 mm (3-15/16 inches) or more around the projec-
tor’s air intake openings.

If  the  projector  is  placed  in  a  box  or  enclosure,  ensure  the  temperature  of  the  air  surrounding  the
projector  is  between  0°C  and  35°C  (32°F  and  95°F).  Also  make  sure  the  projector’s  intake  and
exhaust  openings  are  not  blocked.  Take  particular  care  to  ensure  that  hot  air  from  the  exhaust
openings  is  not  sucked  into  the  intake  openings.

100 mm ( 3-15/16 in )

or more

100 mm ( 3-15/16 in )

or more

100 mm ( 3-15/16 in )

or more

Direction of air intake and exhaust

Intake

Exhaust

Operating the projector continuously

If the projector is to be operated continuously 6 hours or more, lamp replacement cycle duration
becomes shorter.

The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.

All other trademarks are the property of their respective trademark owners.

Command example

To set the input to HDMI 1, send the command as
shown below.

STX

Start

Command

Parameter

End

IIS

HD1

ETX

NOTE: When sending commands without parameters, a colon (:) is not necessary.