Intermec 073290-001 User Manual

To replace the Ethernet card, you may need the following tools and parts: 

•  T10 Torx screwdriver 

•  Small Phillips screwdriver 

•  Ethernet card assembly (P/N 073867-001) 

•  Ethernet cable assembly (P/N 073096-001) 

•  2-56 x 3/16 stainless steel screw (P/N 801-210-000) 

•  2-28 x .250 Plastite flathead screw (P/N 800-193-000) 

 

Open the CK30. For help, see “Opening the CK30” on page 9. 

Disconnect the Ethernet cable from J12 on the main PCB. 

Remove the four Phillips screws (two self-tapping flathead and two 
machine) from the mini PCI shield assembly and lift the shield off of 
the Ethernet card assembly. 

Open the retainer clips and pull the Ethernet card assembly away from 
the connector. 

Insert the new Ethernet card assembly into the connector until the two 
retainer clips lock in place. 

 

 

Ethernet
card assembly

Mini PCI
shield
assembly

J12

Ethernet
cable

Screw
(2 places)

Screw
(2 places)

Retainer
clips