Intermec 073290-001 User Manual

To replace the main PCB, you need the following tools: 

•  T10 Torx screwdriver 

•  Small Phillips screwdriver 

You also need one of the following parts depending on the CK30 
configuration: 

•  CK30 64M/64M main PCB assembly (P/N 072291S-007) 

•  CK30 32M/32M main PCB assembly (P/N 072926S-008) 

•  LCD support bar (P/N 073497-002) 

•  KA22 x 6 WN 1412 Elco screw (591825-001) 

 

Open the CK30. For help, see “Opening the CK30” on page 9. 

Disconnect the power/good read indicator light pipe assembly cable 
and the speaker PCB assembly cable from the main PCB. 

 

 

Power/good
read indicator
light pipe  
assembly
cable

Speaker
PCB assembly
cable

 

Remove the radio and antenna assembly or the Ethernet card. For help, 
see the appropriate procedure. 

Remove the two Phillips screws with captive washers from the top of the 
main PCB and gently separate the main PCB from the top cover. 

Detach the display flex cable and the keypad flex cable from the main 
PCB and remove the main PCB.