Fujitsu TX300 S7 VFY:T3007SX040ES Data Sheet
Product codes
VFY:T3007SX040ES
Data Sheet
Fujitsu Server PRIMERGY TX300 S7 Tower Server
Page 3 / 7
www.fujitsu.com/fts
Technical details
PRIMERGY TX300 S7
Housing types
Tower
Tower
Storage drive architecture
3.5-inch
2.5-inch
Power supply
Hot-plug
Hot-plug
Mainboard
Mainboard type
D2949
Chipset
Intel® C600 (Intel® Patsburg A)
Processor quantity and type
1 - 2 x Intel® Xeon® processor E5-2600 product family
Memory slots
24 (12 DIMMs per CPU, 4 channels with 3 slots per channel)
Memory slot type
DIMM (DDR3)
Memory capacity (min. - max.)
2 GB - 768 GB
Memory protection
Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory notes
Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory
modules/CPU with single or dual-rank RDIMM or single, dual-rank or quad-rank Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
modules/CPU with single or dual-rank RDIMM or single, dual-rank or quad-rank Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
Interfaces
USB 2.0 ports
10 x USB 2.0 (2x front, 4x rear, 2x internal for backup devices, 1x USB stick, 1x USSD)
Graphics (15-pin)
2 x VGA (thereof 1x front optional)
Serial 1 (9-pin)
1 x serial RS-232-C, usable for iRMC S3 or system or shared
LAN / Ethernet
2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s
(SFP+)
(SFP+)
Service LAN (RJ45)
1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
or optional Modular LAN 2x10Gbit controller
Front management LAN port as option
Service LAN traffic can be switched to shared onboard Gbit LAN port
or optional Modular LAN 2x10Gbit controller
Front management LAN port as option
Onboard or integrated Controller
RAID controller
4 port for internal 3G SATA and SAS (as upgrade option with SAS enabling key) for HDDs with RAID 0/1/10 or SAS LTO
device (Intel C600)
additional RAID controller options are described under Components RAID controller
device (Intel C600)
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C600, 2 x SATA channel for DVD
LAN Controller
Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless)
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless)
Remote Management Controller
Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
IPMI 2.0 compatible
GPU / Coprocessor
1-2 NVIDIA® Tesla™ C2075 GPGPU
1-2 NVIDIA® Tesla™ K20 and K20X GPGPU
1-2 Intel® Xeon® Phi 5110P coprocessor
1-2 NVIDIA® Tesla™ K20 and K20X GPGPU
1-2 Intel® Xeon® Phi 5110P coprocessor
Trusted Platform Module (TPM)
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x4 (mech. x8)
2 x Full height (2nd processor required)
PCI-Express 3.0 x8
4 x Full height (1 is reserved for Modular RAID controller)
PCI-Express 3.0 x8 (mech. x16)
1 x Full height
PCI-Express 3.0 x16
2 x Full height (2nd processor required)
PCI-Express 2.0 x4 (mech. x8)
1 x Full height (2nd processor required)
Slot Notes
One PCIe Gen3 x8 slot may be occupied with a modular LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a modular RAID controller if configured.
Important: 5 PCIe slots are supported with the first processor. 10 PCIe slots are supported with two processors.
One PCIe Gen3 x8 slot may be occupied with a modular RAID controller if configured.
Important: 5 PCIe slots are supported with the first processor. 10 PCIe slots are supported with two processors.