LevelOne 4 x 802.3af PoE + 4 FE Unmanaged Switch -10 ~ 60C, DIN-rail IES-0811-v1 Leaflet
Product codes
IES-0811-v1
Overview
LevelOne IES-0811 Industry Ethernet Switch provides 4 PoE ports of
10/100Base-TX plus 4 ports of 10/100Base-TX Ethernet to enable high
speed network at mission-critical environment. This device is designed
to be mounted on an industry standard DIN-rail, plus the clearly visible
status LEDs provide simple monitoring of port link activity.
Cost Effective
This device operates under -10 to 60 Celsius (-14 to 140 Fahrenheit)
temperature that offers optimal suitability for industrial applications at
low cost while maintaining all components built to withstand harsh
environment applications without compromise reliability and stability.
Features
- Provides flexibility of 8 Ethernet ports that configure in combinations
of copper and fiber optic interfaces
- -10°C to 60°C (14°F to 140°F) and is tested for functional operation @
-20°C to 70°C (-4°F to 158°F)
- Port1 - 4 support IEEE802.3af Power over Ethernet (PoE) Power
Sourcing Equipment (PSE)
- Provides DIN-rail, panel or rack mounting
- Alarms for power and port link failure by relay output
- Redundant power inputs with Terminal Block and DC Jack
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
- Complies with NEMA TS2 Environmental requirements for Traffic
control equipment
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Redundancy
This redundant power system is designed to meet the challenge of
power failure to ensure reliability and constant availability. Single power
design works fine in non-critical network applications, but it falls short
drastically for network applications in transportation, automate
production or banking.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of instant
connectivity with no setup or configure required, truly plug and play.
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully complied
with IEEE 802.3af PoE standard at maximum 15.4W power budget per
port. It helps to save infrastructure wiring costs dramatically by
eliminating electric wiring and less UPS needed.
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and off 6,000 times while
loaded, with no single failure. Plus, it is the E-Mark complied to ensure
reliability at rolling stock applications. It’s highly reliability and safety
measurement to ensure field hardened, especially for the harsh
environment.
IES-0811
Diagrams
4 x 802.3af + 4 FE Unmanaged Switch
-10 to 60C, DIN-rail
Unit: mm
Side
Buttom
Top
Front
62
1
1
0
13
5