Intermec 073292-001 User Manual
Chapter 2 — Replacing Parts
Keypad
assembly
assembly
Keypad
flex
cable
flex
cable
4
Remove the adhesive residue left by the keypad assembly on the top
cover.
cover.
5
Remove the adhesive backing from the new keypad assembly.
Keypad
assembly
assembly
Adhesive
backing
backing
6
Connect the keypad flex cable to the keypad assembly and firmly attach
the keypad assembly to the top cover. Make sure the keypad flex cable
properly z-folds under the main PCB.
the keypad assembly to the top cover. Make sure the keypad flex cable
properly z-folds under the main PCB.
7
Insert a new bezel assembly. For help, see “Replacing the Bezel
Assembly” on page 17.
Assembly” on page 17.
Replacing the SE1200 Scanner
To replace the SE1200 scanner, you need the following tools:
• T10 Torx screwdriver
• Small Phillips screwdriver
You also need one or more of the following parts depending on what you
need to replace:
need to replace:
• SE1200 standard range scan engine assembly (P/N 590014-004)
• SE1200 advanced long range scan engine assembly (P/N 591098-003)
• SE1200 CK30 scan flex cable (P/N 072781-003)
• SE1200 shield (P/N 073883-002) (if necessary)
• SE1200 visor (P/N 073703-003)
• Large scan mount bracket (P/N 072865-002)
• M2 x 0.4 by 4mm steel panhead screw (P/N 800-318-004)
• Phillips 2-28 x .250 thread-form screw (P/N 525301)
CK30 Handheld Computer Service Manual
21