Arctic Cooling Accelero Xtreme PLUS II COOL-XTREME-GTX28 Leaflet
Product codes
COOL-XTREME-GTX28
Press Release
May 25, 2011
1 of 2
Accelero XTREME Plus II - Higher versatility. Greater compatibility.
Pfäffikon/Switzerland, May 25th, 2011
To meet the never-ending demands of computer enthusiasts, ARCTIC introduces the Accelero
XTREME Plus II today. The Accelero XTREME Plus II carries the objectives of its predecessor
model and continues to have multi-compatibility and unmatched performance. Once again, the
standards of high-end VGA coolers are pushing to new heights.
The mounting mechanism of the Accelero XTREME Plus II
has been enhanced. It is now able to fit different models of
graphic cards straight out of the box. New mounting plates will
be developed to fit future VGA boards in case the included kit
is not compatible. Differed from its predecessor, the Accelero
XTREME Plus II includes 31 VR and RAM heatsinks and thus
does excellent cooling of all the components around the GPU
on virtually every board.
Performance-wise, the Accelero XTREME Plus II is certainly a top-notch player in the market.
Tri-fan design with five double sided heatpipes and 83-fin heatsink, the Accelero XTREME Plus II
ensures 250 Watts of cooling capacity. Pre-applied with MX-4, the thermal conductivity of the GPU
is further enhanced. It goes without saying that the Accelero XTREME Plus II is virtually silent
since it is equipped with three ultra-quiet 92 mm PWM fans each with a low noise impeller and a
patented fan holder.
For affixing the VR and RAM heatsinks, the G-1 thermal glue is provided to offer enhanced
components cooling. Although the G-1 has a more reliable adhesiveness, it is as easy to remove
as a thermal tape without leaving any residues behind.
Packaged with all these desirable attributes in a single VGA
cooler: versatility, multi-compatibility, and unmatched cooling
performance, the Accelero XTREME Plus II comes with a
6-year limited warranty, with a MSRP set at € 64.9. It is definitely
a must-buy item for overclockers and silent enthusiasts.
Specifications
Dimensions
288 L x 103 W x 50 H mm
Heatsink Material
Aluminum fins x 83, thickness 0.3 mm
Heatpipe
Ø 6 mm x 5
Fan
92 mm x 3 fans with 300 mm cable
Fan Speed
900 - 2,000 RPM (Controlled by PWM)
Airflow
81 CFM / 138 m³/h
Max. Cooling Capacity
250 Watts
Bearing
Fluid Dynamic Bearing
Noise Level
0.5 Sone
Weight
615 g