Alcatel-Lucent OS9-GNI-U24 User Manual
Alcatel-Lucent
Page 41
OmniSwitch 9000
XFP-10G-ER40 Technical Specifications
Features
Supports 9.95Gb/s to 10.7Gb/s bit rates
• Hot-pluggable XFP footprint
• Maximum link length of 40km
• Temperature-stabilized EML transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range: -5°C to 70°C
• Hot-pluggable XFP footprint
• Maximum link length of 40km
• Temperature-stabilized EML transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range: -5°C to 70°C
Standards Supported
IEEE 802.3ae & 10GBASE-ER
Connector Type
The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match XFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Supports the ability to mix and match XFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Cable Supported
Single mode; Full Duplex only
Source Type
supports 10µm & 1550nm
Cable Distances*
≈ up to 40km
Power Consumption
≈ 3.5watts
Operating Temperature
-5 to 70°C
Transmitter Average Output (launch) optical power
Min: -1.0dBm& Max: +2.0dBm
Receiver Sensitivity @9.95Gbps to 11.1Gbps
Min: 0dBm & Max: -16dBm
Power Budget**
15dBm (16 – 1.0 = 15dBm)
XFP-10G-ZR80 Technical Specifications
Features
Supports 9.95Gb/s to 10.7Gb/s bit rates
• Hot-pluggable XFP footprint
• Maximum link length of 80km
• Temperature-stabilized EML transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range: -5°C to 70°C
• Hot-pluggable XFP footprint
• Maximum link length of 80km
• Temperature-stabilized EML transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range: -5°C to 70°C
Standards Supported
IEEE 802.3ae & 10GBASE-ZR
Connector Type
The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match XFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Supports the ability to mix and match XFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Cable Supported
Single Mode; Full Duplex only
Source Type
Supports 10µm & 1550nm
Cable Distances*
≈ up to 80km
Power Consumption
≈ 3.5 watts
Operating Temperature
-5 to 70°C
Transmitter Average Output (launch) optical power
Min: 0dBm & Max: +4.0dBm
Receiver Sensitivity @9.95Gbps
Min: 0dBm & Max: -24dBm
Power Budget**
24dBm (24 – 0 = 24dBm)
Notes:
*Maximum distance support” is claimed by the original vendor and not by Alcatel.Lucent IP Networking.
**The worst-case Optical Power Budget in “dB” for a fiber optic link is determined by:
The difference between the minimum transmitters output optical power and the lowest receiver sensitivity.
*Maximum distance support” is claimed by the original vendor and not by Alcatel.Lucent IP Networking.
**The worst-case Optical Power Budget in “dB” for a fiber optic link is determined by:
The difference between the minimum transmitters output optical power and the lowest receiver sensitivity.