Fujitsu RX300 S6 LKN:R3006S0279FR Data Sheet

Data Sheet

 Fujitsu PRIMERGY RX300 S6 Dual socket 2 U rack server 

Page 5 / 11

http://ts.fujitsu.com/Primergy

Memory protection

Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support

Memory notes

Memory Mirroring with identical modules in each of 2 channels (2 modules per bank), Hot-spare or Performance 
mode with identical modules in all three channels (3 per bank)

Memory Modules Independent Mode

2 GB (1 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM

Memory Modules Mirrored Mode

4 GB (2 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (2 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
16 GB (2 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
32 GB (2 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM

Memory Modules Spare or Performance 
Mode

6 GB (3 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
12 GB (3 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
24 GB (3 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
48 GB (3 module(s) 16 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM

Interfaces

USB ports

10 x USB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x USB stick)

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

Serial 1 (9-pin)

1 x serial RS-232-C,  usable for iRMC or system or shared

Serial 2 (9-pin)

1 x serial RS-232-C

LAN / Ethernet (RJ-45)

2  x Gbit/s Ethernet

Service LAN (RJ45)

1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 
Service LAN traffic can be switched to shared onboard Gbit LAN port

Onboard or integrated Controller

RAID Controller

Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot, if at least 1 HDD is configured).
See under Components RAID controller

SATA Controller

ICH10B, with two SATA channels for DVD + backup

LAN Controller

Intel® 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), VT-c (I/O acceleration and VMDq), PXE boot via 
LAN from PXE server, iSCSI boot (also diskless) via onboard LAN

Remote Management Controller

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 2.0 x4 (mech. x8)

5 x Low profile 

PCI-Express 2.0 x8

2 x Low profile , both are notched x8 slot as well for x16 cards

Slot Notes

Two of four PCI-Express Gen2 x4 slots can be used as x8, if neighbour slot is empty.
One PCIe Gen2 x4 slot may be occupied with a modular RAID controller if configured.