Panasonic Wireless Network Camera BLC-30 Leaflet

Design and specifications are subject to change without notice.   30M0904SK-C10/C30-LT.X

➀

   Printed in Japan

Type:

Indoor Wired

Indoor Wireless

Max. User Access:

20

Pan:

50

° left and right

Tilt:

+10

° up to –40° down

Max. Pan/Tilt Speed:

Pan: 50 deg/sec, Tilt: 50 deg/sec

Preset Positioning:

8

Image Sensor:

CMOS, 1/4 inch

Number of Pixels:

320,000 pixels

Horizontal View Angle:

43

°

White Balance:

Auto/Manual

Focus:

Fixed, 0.5 m ~ Infinity

Caliber Ratio:

F2.8

Exposure:

Auto

Illumination:

1-10,000 lux

Video Resolution:

640 x 480, 320 x 240 (default), 160 x 120

Video Compression:

JPEG/3 Levels

Magnification:

100% or 150%

Frame Rate:

Max. 7.5 frames/sec. (640 x 480)

Max. 15 frames/sec. (320 x 240)
Max. 15 frames/sec. (160 x 120)

Authentication:

ID/Password authentication for Administrator and General user (up to 50)

Trigger of Image Transfer:

Triggered by Built-in senser alarm and/or timer

Built in Sensor:

Pyroelectric Infrared Sensor

Detective Angle: Vertical 30 deg/Horizontal 85 deg

Detective Range: Up to about 5 m (16 feet)

Image Transfer Protocol:

SMTP, FTP

Image Buffer:

about 250 frames (320 x 240, Image Quality=Standard)

Upgrade:

Firmware Upgradable

Max. Brandwidth Control:

0.1/0.2/0.3/0.5/1.0 Mbps/Unlimited

Network Connection:

Ethernet 10/100 Base-TX

Ethernet 10/100 Base-TX

Wireless (IEEE802.11b/g)

Wireless:
   Frequency:

—

2.4000 – 2.4835 GHz

   Number of Channel:

—

13

   Transmission Speed:

—

54 Mbps

   Security:

—

WEP (64/128/152 bit), SSID, TKIP/AES

Mounting:

Wall mount, tripod mount

Accessories:

AC adaptor and AC cord, Setup CD-ROM

Weight:

160 g

200 g

Dimensions (H x W x D):

98 mm x 74 mm x 61 mm

98 mm x 74 mm x 73 mm

Humidity:

20-80% RH, non-condensing

Operation Temperature:

5-40

°C, indoor only

Consumption:

4.5W

6.4W

Voltage:

AC Adaptor Input: AC 100-240V / Output: 12 VDC

Operating System:

Windows

®

98SE, Windows

®

2000, Windows

®

XP, Windows

®

Me

Network Protocol:

HTTP, FTP, TCP, UDP, IP, ARP, ICMP, DHCP, DNS, SMTP, POP3, NTP

Web Browser:

Microsoft

®

Internet Explorer 6.0 or later

*

1

 The remote monitoring via the Internet requires static global IP address from your Internet provider. PPPoE connection requires a suitable router. 

    For connecting via the Internet, it is necessary to use functions (port forwarding etc.) such as a router to access the camera from the Internet. Refer to the 
    instructions of the router.
*

2

 See system requirement for PC control.

*

3

 Can be used only by mobile phones that are equipped with a Web browser and support the JPEG format. Information on compatible models is given on     

    Panasonic Network Camera support web site.
*

4

 This function provides HTML documents (for viewing by Web browsers) over networks.

*

5

 Panasonic offer free DDNS (Direct Domain Name System) service. You can access the camera through the internet without static gloval IP address.

*

6

 The detection range is 5 meters, 30

° in the horizontal direction, and 85° in the vertical direction.

Note:
• Microsoft

®

, Windows

®

 and Windows

®

Me are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or 

    other countries.
• Windows

®

 is Microsoft

®

 Windows

®

 operating system.

• All trademarks referred to in this catalog are the property of their respective companies.

*

2

Human
Detection
Sensor

Lens 
ON/OFF
Switch

74mm

61mm

98mm

Tripod 
Mount

AC Adaptor 
Terminal

10/100 Base-TX Jack

● 

View up to 12 cameras simultaneously

You can move the Network Camera in a horizontal direction.

You can move the Network Camera in a vertical direction.

Changing the direction of the Network Camera on a web browser. Pan: –50

° to +50°/Tilt: +10° to–40°

Preset Positioning allows you to change the direction of the camera by one click.

When you click the certain point on the Single Camera screen, the point is centered on the image.