Sharp LC-60LE858E User Manual

You can reconfigure the analogue TV channels 
settings automatically or manually.

E

Use this menu to add new services automatically 
after “Analogue search” in the “Auto installation” 
menu has been completed.

•  Start searching channels after selecting the colour 

system and sound system.

E

Use this menu to set up analogue TV channels 
manually.

After selecting “Yes” on the screen, press 

a/b/c/d to select the channel you want to 
set and then press 

;.

You can adjust the frequency to the desired position.

•  Adjust while checking the background picture as a 

reference.

•  You can set by directly entering the frequency number 

of the channel with 0_9 numeric buttons.

•  179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
•  49.25 MHz: Press 4 > 9 > 2 > 5 > 

;.

Select the optimum colour system to receive 
(“Auto”, “PAL”, “SECAM”).

Select the optimum sound systems (broadcasting 
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).

When a TV channel sends its network name, the 
“Auto installation” detects the information and 
assigns a name to it. However, you can change 
channel names individually.

Select each character of the new name for the 
channel with using the software keyboard (Page 14).

•  The name can be five characters or less.

Channels with “Skip” set to “On” are passed over 
when using :r/s even if selected while watching 
the image from the TV.

You can block the viewing of any channel.

• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock 

has been activated” displays, and the image and sound 
of the channel are blocked.

• When pressing 6 while “Child lock has been activated” 

displays, the PIN input window will display. Inputting 
the correct PIN unlocks the “PIN” temporarily until the 
power is turned off.

E

Channel positions can be sorted freely.

 

Press 

c/d to select “Yes”, and then press ;.

 

Press 

a/b/c/d to select the channel you 

want to move, and then press 

;.

 

Press 

a/b/c/d to move it to the desired 

position, and then press 

;.

 

Repeat steps 2 and 3 until all desired channels 
are sorted.

E

Channels can be erased individually.

 

Press 

c/d to select “Yes”, and then press ;.

 

Press 

a/b/c/d to select the channel you 

want to erase, and then press 

;.

•  A message window pops up.

 

Press 

c/d to select “Yes”, and then press 

; to erase the selected channel. All the 
subsequent channels move up.

 

Repeat steps 2 and 3 until all desired channels 
are erased.