Fujitsu RX200 S7 VFY:R2007SX010IN/M8 Data Sheet

Data Sheet

 Fujitsu PRIMERGY RX200 S7 Dual socket 1 U rack server  

Page 4 / 9

www.fujitsu.com/fts

Memory notes

Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory 
modules/CPU with single or dual-rank  RDIMM or single, dual-rank or quad-rank  Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or 
Performance Mode with identical modules in all four channels (4 modules per bank).

Memory options

4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
32 GB (1 module(s) 32 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM

Memory options

2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM

Interfaces

USB ports

6 x USB 2.0 (2x front, 3x rear,  1x uSSD)

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

LAN / Ethernet

2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s 
(SFP+)

Service LAN (RJ45)

1 x dedicated management LAN port for iRMC S3  (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port 
or optional Modular LAN 2x10Gbit controller
Front management LAN port as option

Status LEDs

System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)

Onboard or integrated Controller

RAID controller

4 port for internal 3G SATA and SAS (as upgrade option “Patsburg B”) for HDDs with RAID 0/1/10 (Intel C600)
See under Components RAID controller

SATA Controller

Intel® C600, 1 x SATA channel for ODD

LAN Controller

Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN  
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless) 

Remote Management Controller

Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x8

3 x Low profile 

PCI-Express 3.0 x16

1 x Low profile 

Slot Notes

One PCIe Gen3 x8 slot may be occupied with a Modular integrated on-board LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured

Storage drive bays

4 x 2.5-inch base unit or 8 x 2.5-inch base unit

Accessible drive bays

1 x 5.25/0.5-inch for DVD-RW/Blu-ray (only for base unit 4x 2.5-inch HDD)

Notes accessible drives

All possible options described in relevant system configurator.

Drive bays (Base unit specific)

Storage drive bays

4 x 2.5-inch hot-plug SAS/SATA

8 x 2.5-inch hot-plug SAS/SATA

General system information

Number of fans

6