Tripp Lite UT2012UL User Manual
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
Model #: UT2012UL
PowerVerter® 2000W Utility/Work Truck Inverter/Charger with 2 Outlets
Highlights
12V DC or 120VAC input; 120VAC output; 2 GFCI protected outlets
2000 watts continuous, 3000 watts OverPower and 4000 watts
DoubleBoost inverter output
3 stage, 60A / 15A selectable wet / gel / AGM cell battery charger
Built-in Isobar® premium AC surge protection and Auto Transfer
Switching option for battery backup / UPS operation
Meets OSHA requirements
Description
The UT2012UL Utility Work Truck Inverter / Charger is the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with
utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery
transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged
work site applications. Supplies up to 2000W of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower output
feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost output feature delivers up to 200% of
continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is
connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable
15/60Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic
transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling
– see owners manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation,
plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design (tested to UL (USA) and (CSA)
Canada standards) with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high
current needs on start-up. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off
switching and continuous status information. The UT2012UL supports an unlimited amount of runtime with user-supplied batteries.
utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery
transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged
work site applications. Supplies up to 2000W of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower output
feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost output feature delivers up to 200% of
continuous output for up to 10 seconds, providing the extra power needed to start heavy-duty tools and motorized equipment. When AC cable is
connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable
15/60Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic
transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation (user supplies batteries and cabling
– see owners manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation,
plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design (tested to UL (USA) and (CSA)
Canada standards) with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high
current needs on start-up. Included is the APSRM4 wired remote power switch with full status LED’s, which provides remote power inverter on/off
switching and continuous status information. The UT2012UL supports an unlimited amount of runtime with user-supplied batteries.
Applications
Versatile inverter / charger system with auto-transfer switching serves as an automotive inverter for utility work trucks, conversion vans, high
humidity environments and fleet service vehicles; a standalone power source for off grid, alternative energy or export applications, emergency home
power applications such as sump pumps, and as an uninterruptible power supply (UPS) for items compatible with a 16.6 millisecond transfer time.
humidity environments and fleet service vehicles; a standalone power source for off grid, alternative energy or export applications, emergency home
power applications such as sump pumps, and as an uninterruptible power supply (UPS) for items compatible with a 16.6 millisecond transfer time.
Package Includes
UT2012UL Inverter/Charger
APSRM4 Remote
Remote battery temperature sensor cable
Instruction manual with warranty information
Features
16.6 millisecond automatic transfer between line and battery power supports UPS protection for equipment compatible with a one cycle
transfer time
2000W continuous AC output in inverter mode, 4000W continuous AC output in AC mode
DoubleBoost output supports momentary startup loads of up to 200% of the continuous rating for up to 10 seconds - OverPower output
supports duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
3-stage selectable 15/60 Amp battery charger with adjustable settings for wet/gel/AGM battery types
2 NEMA 5-15R GFCI protected outlets pass 120V line power or inverter output through to connected equipment
3 position operating mode switch supports “AUTO” mode to enable automatic transfer between DC and AC modes, CHARGE ONLY to
maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of 6 front panel LED’s display continuous status