Stratasys Objet350 Connex OBJET350 CONNEX Leaflet
Product codes
OBJET350 CONNEX
Technical Specifications
Layer Thickness (Z-axis)
Horizontal build layers down to 16-micron
Tray Size (X×Y×Z)
350×350×200 mm (13.8×13.8×7.9 inch)
Net Build Size (X×Y×Z)
342×342×200 mm (13.4×13.4×7.9 inch)
Build Resolution
X-axis: 600 dpi
Y-axis: 600 dpi
Z-axis: 1600 dpi
Printing Modes
Digital Material (DM): 30-micron (0.001 inch)
High Quality (HQ): 16-micron (0.0006 inch)
High Speed (HS): 30-micron (0.001 inch)
Typical Accuracy
20-85um for features below 50mm
Up to 200um for full model size
Up to 200um for full model size
(for rigid materials only, depending on
geometry,build parameters and model orientation)
Supported Model Materials
• FullCure®720 General Purpose, transparent
• FullCure®720 General Purpose, transparent
material
• Vero Family opaque materials
• DurusWhite Polypropylene-like material
• Tango Family rubber-like flexible material
• Vero Family opaque materials
• DurusWhite Polypropylene-like material
• Tango Family rubber-like flexible material
Digital Materials
Wide range of composite materials fabricated
on the fly
Support Type
• FullCure®705 Support
• Non-toxic gel-like photopolymer support
easily removed by WaterJet
Materials Cartridges:
• Four sealed 3.6 kg (7.9 lb) cartridges
• Tango family and DurusWhite also
• Four sealed 3.6 kg (7.9 lb) cartridges
• Tango family and DurusWhite also
available as 1.44kg (3.17 lb) net weight
in 3.6 kg casing
• Two different model materials loaded
• Front loading for quick replacement
• Front loading for quick replacement
Power Requirements
110–240 VAC 50/60 Hz
1.5 KW single phase
Machine Dimensions (W×D×H)
1420×1120×1130 mm
(55.9×44.1×44.5 inch)
Machine Weight
Net 500kg (Net 1102 lb)
Operational Environment
18°C to 22°C (64.5°F to 71.5°F)
Relative Humidity 30 – 70%
Compatibility
Windows XP, Windows Vista
Software
Objet Studio™ for Connex350 features:
• Easy selection of materials including
Digital Materials
• Part separation into sub-assemblies
• Automatic real time support structure
• Part separation into sub-assemblies
• Automatic real time support structure
generation
• Suggested build orientation and speed,
• Suggested build orientation and speed,
auto-place
• Slice on the fly
• PolyLog™ Materials Management
• Network version
• Slice on the fly
• PolyLog™ Materials Management
• Network version
Input Formats
STL, OBJDF and SLC Files
CADMatrix™ Add-in
CADMatrix add-in enables designers and
engineers to seamlessly assign Objet model
materials to multi-part, multi-material designs
within CAD software*, thus allowing for
increased control of 3D model validation.
Special Facility Requirements
None
Print Heads
8 Units
Network Communication
LAN – TCP/IP
Multi-material 3-Dimensional Printing System
Connex
350
* CAD software: CADMatrix™ is compatible with the following:
Pro/ENGINEER
Pro/ENGINEER
®
, SolidWorks, AutoDesk Inventor
© 2012 Stratasys Ltd. All rights reserved. Stratasys, Stratasys logo, Objet, For a 3D World, Objet24,
Objet 30 Pro, Objet Studio, Quadra, QuadraTempo, FullCure, SHR, Eden, Eden250, Eden260,
Eden260V, Eden 330, Eden350, Eden350V, Eden500V, Jo Manager, CADMatrix, Connex, Objet260
Connex, Connex350, Connex500, Alaris, Alaris30, PolyLog, TangoBlack, TangoGray, TangoPlus,
TangoBlackPlus, VeroBlue, VeloBlack, VeroBlackPlus, VeroClear, VeroDent, VeroGray, VeroWhite,
VeroWhitePlus, Durus, Digital Materials, PolyJet, Polyjet Matrix, ABS-like and ObjetGreen are trademarks
or registered trademarks of Stratasys Ltd. and/or its subsidiaries or affiliates and may be registered in
certain jurisdictions. All other trademarks belong to their respective owners.
Q3/12
www.stratasys.com
|
www.objet.com
|
objet-info@stratasys.com