Teldat bintec R1202 5510000262 User Manual
Product codes
5510000262
bintec R1202
29.10.2013
Subject to technical alterations
Page 2 / 10
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
The flexible VPN gateway for all cases
The bintec R1202 VPN gateway with Gigabit Ethernet and an ISDN interface has been designed
for SMEs and medium-sized corporate headquarters with higher performance requirements.
for SMEs and medium-sized corporate headquarters with higher performance requirements.
The bintec R1202 is a powerful and, thanks to its comprehensive equipment, flexible VPN
gateway. With its 19-inch metal housing and highly efficient internal switched-mode power
supply the gateway guarantees long-term reliability in critical corporate applications. This makes
the R1202 ideal for use as a VPN gateway in SMEs and company head offices. The device has
five Gigabit Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a
licence for ten hardware-accelerated IPSec tunnels. Up to 100 additional IPSec tunnels can also
be enabled if licensed.
The built-in ISDN BRI interface can be used as a remote configuration access and as an ISDN
backup interface.
gateway. With its 19-inch metal housing and highly efficient internal switched-mode power
supply the gateway guarantees long-term reliability in critical corporate applications. This makes
the R1202 ideal for use as a VPN gateway in SMEs and company head offices. The device has
five Gigabit Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a
licence for ten hardware-accelerated IPSec tunnels. Up to 100 additional IPSec tunnels can also
be enabled if licensed.
The built-in ISDN BRI interface can be used as a remote configuration access and as an ISDN
backup interface.
Using functions flexibly
Only a few functions are required to forward data between two networks. Bintec gateways have
features that go far beyond just routing and allow it to be seamlessly integrated into complex IT
infrastructures.
As routing protocols, you can use RIP, OSPF or the Multicast routing protocol PIM-SM for example,
and the comprehensive multicast support makes the device ideal for use in multimedia and
streaming applications.
Even the basic equipment of the bintec R1202 provides a SIP application level gateway (ALG) for
the direct connection of IP telephones in the network or for registering with a VoIP provider. The
ALG automatically controls the internal firewall making it easier to configure your VoIP solution.
Thanks to the integrated quality of service, you can prioritise VoIP traffic over normal internet
traffic, for example, and thereby always ensure sufficient bandwidth for your IP voice
connections. Alternatively you can give normal data traffic priority over e-mail traffic. The DNS
proxy function supports the LAN for address implementation and the automated IP configuration
of PCs is carried out over an integrated DHCP server.
Remote CAPI is available for the joint use of various ISDN services.
Only a few functions are required to forward data between two networks. Bintec gateways have
features that go far beyond just routing and allow it to be seamlessly integrated into complex IT
infrastructures.
As routing protocols, you can use RIP, OSPF or the Multicast routing protocol PIM-SM for example,
and the comprehensive multicast support makes the device ideal for use in multimedia and
streaming applications.
Even the basic equipment of the bintec R1202 provides a SIP application level gateway (ALG) for
the direct connection of IP telephones in the network or for registering with a VoIP provider. The
ALG automatically controls the internal firewall making it easier to configure your VoIP solution.
Thanks to the integrated quality of service, you can prioritise VoIP traffic over normal internet
traffic, for example, and thereby always ensure sufficient bandwidth for your IP voice
connections. Alternatively you can give normal data traffic priority over e-mail traffic. The DNS
proxy function supports the LAN for address implementation and the automated IP configuration
of PCs is carried out over an integrated DHCP server.
Remote CAPI is available for the joint use of various ISDN services.
Comprehensive IPSec implementation
The IPSec implementation integrated in bintec R1202 works not only with preshared keys but
also with certificates. This allows a public key infrastructure to be created for maximum security.
(The German Federal Office for Information Security also recommends the use of certificates.)
Furthermore, the bintec IPSec implementation offers support when creating VPN connections
with dynamic IP addresses: Even small branch offices can be reached without having to be
permanently online. If both VPN nodes only have dynamic IP addresses, confidential information
can continue. The exchange of IP addresses is carried out either over dynamic DNS providers or
directly over an ISDN connection. The actual dynamic IP address is transferred either free of
charge in the ISDN D-channel or, if this is not possible, in the B-channel (at cost).
By using IKE Config mode and the bintec IPSec multi user this offers the opportunity to create
and manage IPSec dial-in solutions for multiple clients with minimal expense and IKE X-Auth
(extended authentication) allows a connection to be secured with a one time password and thus
with the highest level of security.
The IPSec implementation integrated in bintec R1202 works not only with preshared keys but
also with certificates. This allows a public key infrastructure to be created for maximum security.
(The German Federal Office for Information Security also recommends the use of certificates.)
Furthermore, the bintec IPSec implementation offers support when creating VPN connections
with dynamic IP addresses: Even small branch offices can be reached without having to be
permanently online. If both VPN nodes only have dynamic IP addresses, confidential information
can continue. The exchange of IP addresses is carried out either over dynamic DNS providers or
directly over an ISDN connection. The actual dynamic IP address is transferred either free of
charge in the ISDN D-channel or, if this is not possible, in the B-channel (at cost).
By using IKE Config mode and the bintec IPSec multi user this offers the opportunity to create
and manage IPSec dial-in solutions for multiple clients with minimal expense and IKE X-Auth
(extended authentication) allows a connection to be secured with a one time password and thus
with the highest level of security.
Load Balancing/Redundancy
The bintec R1202 offers the opportunity to configure two or three interfaces as WAN interfaces.
The bintec R1202 offers the opportunity to configure two or three interfaces as WAN interfaces.
bintec R1202