Tripp Lite B140-002-DD Leaflet

 

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

Model #: B140-002-DD

 

Split and extend Dual DVI signals from a computer to two sets of Dual Displays

1920x1080 resolution up to 150ft

Up to 4 displays per channel when using repeaters

distances up to 50ft @ 1920x1080 resolution, or 100ft @ 1024x768 resolution, over solid conductor Cat6 cable. 

, powered Receivers extend

the distance to 150ft @ 1920x1080, and 200ft @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained (up to 3) on
each channel, allowing four monitors per channel, by using Tripp Lite 

 Repeater/Extender. Tripp Lite recommends Cat6 Solid Conductor

patch cables for Digital Extenders (DVI/HDMI). Tripp Lite 

 patch cables are designed specifically for these types of

devices...pre-terminated, Solid Conductor Cat6 patch cables up to 200ft. 

Applications

Digital Signage utilizing DVI source video and DVI Monitors

Package Includes

B140-002-DD Extender / Splitter Transmitter Unit

External Power Adapter ( Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A )

Mounting Hardware

Owner's Manual

Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays

A B140-Series remote receiver is needed at each monitor

For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to extend a 1920 x 1080 @ 60Hz signal up to 150 ft. from the

transmitter (or a 1024 x 768 @ 60Hz signal up to 200 ft. from the transmitter)

For shorter distances: Use a B140-1P0 or B140-1P0-WP passive receiver to extend a 1920 x 1080 @ 60Hz signal up to 50 ft. from the

transmitter (or a 1024 x 768 @ 60Hz signal up to 100 ft. from the transmitter)

Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series to achieve maximum distance and resolution

Further expand the range and number of monitors by adding B140-110 remote repeater units

Add up to three repeaters on each of the B140-002-DD channels, for a total of 4 displays per channel (An active receiver should be the last

unit in a channel)

A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1024 x 768 @

60Hz signal)

DVI 1.0 compliant

HDCP compatible

Mounting hardware included that allows the unit to be wall-mounted, rackmounted, or pole mounted

Plug and play; no software or drivers required