Teldat bintec W2003n-ext 5510000325 User Manual

bintec W2003n-ext

25.11.2013

Subject to technical alterations

Page 6 / 9

Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: info@teldat.de - www.teldat.org

Receiver Sensitivity @ 2.4 GHz
802.11b/g

1 Mbps -95 dBm; 2 Mbps -95 dBm; 5,5 Mbps -93 dBm; 11 Mbps -92 dBm; 6 Mbps -95 dBm; 9 Mbps
-94 dBm; 12 Mbps -93 dBm; 18 Mbps -91 dBm; 24 Mbps -87 dBm; 36 Mbps -84 dBm; 48 Mbps -83
dBm; 54 Mbps -81 dBm

Receiver Sensitivity @ 2.4 GHz
802.11n 20 MHz

MSC0/8 -95 dBm; MSC1/9 -93 dBm; MCS2/10 -92 dBm; MCS3/11 -88 dBm; MCS4/12 -85 dBm;
MSC5/13 -82 dBm; MCS6/14 -80 dBm; MCS7/15 -78 dBm

Receiver Sensitivity @ 2.4 GHz
802.11n 40 MHz

MSC0/8 -93 dBm; MSC1/9 -92 dBm; MCS2/10 -89 dBm; MCS3/11 -86 dBm; MCS4/12 -83 dBm;
MSC5/13 -81 dBm; MCS6/14 -78 dBm; MCS7/15 -76 dBm

Output power limitation (
without antenna gain)

Adjustable in following steps: 5, 8,11,14,16 dBm and maximum. Maximal power varies depending
on data rate, frequency band and country setting.

Output power @ 2.4 GHz

Max. 20dBm (100mW EiRP)

Output power @ 5 GHz

Max. 23 dBm (200mW EiRP)

Automatic Rate Selection (ARS)

Available

Transmission rate

Automatic

Number of spatial streams
(802.11n)

1 or 2

Bandwidth (802.11n)

20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel)

Short guard interval (802.11n)

On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns

DTIM Period

Adjustable

Extended Performance Feature

Beamforming, MRC (Maximum Ratio Combining), Block-Acknowlegde

Multi SSID

Up to 8 service sets per radio module, with virtual access points and own MAC address per SSID.

Broadcast SSID

On/off switchable

Power management for clients

Registering of up to 250 clients per radio module simultaneously in access point mode. Default is
32 clients.

Country-specific settings

Channel settings according regulatory domain (802.11d) permitted.

RTS/CTS

RTS/CTS threshold adjustable

Encryption WEP/WPA

WEP64 (40 Bit key), WEP128 (104 Bit key), WPA personal, WPA enterprise, WPA2 personal, WPA2
enterprise

IEEE802.11i authentication and
encryption

802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP
encryption, AES encryption, 802.1x/EAP

Access control list (ACL)

MAC address filter for WLAN clients (white list) and dynamic and static blacklist. Black list function
requires WLAN Controller

WIDS (Wireless Intrution
Detection System)

Rogue AP detection: detect foreign Aps, which try to spy out data via SSIDs by permanent
background scanning. This functionality requires WLAN Controller.

WIDS (Wireless Intrution
Detection System)

Rogue Client Detection: detection and protection: detect conspicuous clients, which try to intrude
or interfere the wireless network.In threat case blocking by dynamic black list. This functionality
requires WLAN Controller.