Gigaset DA610 S30054-S212-R102 User Manual
Product codes
S30054-S212-R102
Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / telephony.fm / 23.04.2012
en fr fa ar
11
1110-01
Network services
Public telephone systemsoffer you – in some cases only on request – a
range of helpful, additional services (e. g. call forwarding, callback when
busy, withheld number, etc.). These services can be selected using spec-
ified key combinations, of which your network provider will notify you.
range of helpful, additional services (e. g. call forwarding, callback when
busy, withheld number, etc.). These services can be selected using spec-
ified key combinations, of which your network provider will notify you.
Caller display (CLIP)
If the caller display service is activated, an incoming call is shown on the
display with the number and saved in the call list. Requirement: The
network provider supports the following service features and the
number transfer is not withheld by the caller:
display with the number and saved in the call list. Requirement: The
network provider supports the following service features and the
number transfer is not withheld by the caller:
u CLI (Calling Line Identification): The caller's number is transferred.
u CLIP (Calling Line Identification Presentation): The caller's number is
displayed.
You can transfer this number to the phonebook and edit it (
£
page 7).
If you have saved the local dialling code (
£
page 11), a call with the
same dialling code is automatically only displayed as the number with-
out the dialling code.
out the dialling code.
Recall key
In public telephone systems the recall key (flash) is required for the use
of various additional services; e.g. for "callback when busy".
If necessary, the flash time on your telephone must be adjusted to the
requirements of the telephone system (
of various additional services; e.g. for "callback when busy".
If necessary, the flash time on your telephone must be adjusted to the
requirements of the telephone system (
£
page 11).
Setting up a dialling code
If necessary you can change the default setting for the area code for your
connection which is saved in the telephone. The number saved here is
then used to display only the number of the person calling without the
area code in the call lists, provided they have the same area code.
You can enter two area codes.
connection which is saved in the telephone. The number saved here is
then used to display only the number of the person calling without the
area code in the call lists, provided they have the same area code.
You can enter two area codes.
K 4
Activate setting mode for the area code. The default
number is displayed.
number is displayed.
Q
...
O
/
*
/
#
Enter the new area code (max. 5 digits).
To edit the second area code:
v
Confirm with
[
and continue.
To save the settings:
K
Save your settings and exit the setting mode.
Operation on a PABX
Special functions/Recall key
During an external call, you can make an enquiry or forward the call. To
do this, press the recall key
do this, press the recall key
H
. The subsequent procedure depends
on your PABX. To set the recall key, the telephone's flash time must be set
consistently with your PABX. Please refer to the operating instructions
for your PABX.
consistently with your PABX. Please refer to the operating instructions
for your PABX.
Changing the dialling mode/flash time
The telephone supports the following dialling modes:
u Tone dialling
u Pulse dialling
Depending on your PABX, you may need to change your phone's dialling
mode or the flash time. (Default setting: Tone dialling)
Depending on your PABX, you may need to change your phone's dialling
mode or the flash time. (Default setting: Tone dialling)
Changing the dialling mode
K #
Activate setting mode for the dialling mode.
Press the key code for the dialling mode:
Press the key code for the dialling mode:
K
Save your settings and exit the setting mode.
Temporary switch to tone dialling in "Pulse" position
To use functions that require tone dialling (e.g. remote control of
answering machine), you can set the telephone to tone dialling for the
duration of the call.
After the connection is established:
answering machine), you can set the telephone to tone dialling for the
duration of the call.
After the connection is established:
*
Press the star key.
After the connection is terminated, the setting reverts to pulse dialling.
Changing the flash interval
You can change the flash interval if the dialling mode is set to tone dial-
ling (see above) (default setting 90 ms).
ling (see above) (default setting 90 ms).
K
Activate setting mode.
O 5
Press the key code for setting the flash interval.
Q
...
4
Select the flash interval (ms):
K
Press the set key to save your settings and exit the setting
mode.
mode.
Setting dialling prefixes
If your phone is connected to a PABX, you may have to use a dialling pre-
fix to make external calls. You can save up to three prefixes in your tele-
phone.
If a dialling prefix is recognised during dialling, a dialling pause will auto-
matically be applied. You can adjust the time of the dialling pause if nec-
essary (
fix to make external calls. You can save up to three prefixes in your tele-
phone.
If a dialling prefix is recognised during dialling, a dialling pause will auto-
matically be applied. You can adjust the time of the dialling pause if nec-
essary (
£
page 12).
K Q
Activate setting mode for the dialling prefix.
The current setting of the first dialling prefix is displayed.
Q
...
O
,
*
,
#
,
H
Enter the dialling prefix (1 to 3 digits) and confirm with
[
.
Enter the next prefix and confirm with
[
.
u
Hold down the control key
X
to delete the current dial-
ling prefix.
K
Save your settings and exit the setting mode.
Tone dialling
2
Pulse dialling
0 = 90
1 = 120
2 = 270
3 = 375
4 = 600