Gigaset DA610 S30054-S212-R101 User Manual

Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / telephony.fm / 23.04.2012

10

en fr fa ar

1110-01

K 5 *

Activate setting mode for the VIP ringer volume. If you lift 
the handset, you will hear the VIP ringer at the currently 
set volume. 

D 

/ 

E

Increase or decrease the volume for the ringer.

Q

 ... 

4

Select the desired value using the number keys.

K

Press the set key or 

[

 to save your settings and exit the 

setting mode.

K M *

Activate setting mode for the VIP ring tone. If you lift the 
handset, you will hear the currently set VIP ring tone.

Q

 ... 

O

Select the required ring tone.

K

Press the set key or 

[

 to save your settings and exit the 

setting mode.

If you do not wish to be disturbed, you can switch off the ringer. The fol-
lowing three settings are available: all tones off, VIP only on, all tones on.

*

Hold down the key to switch all ring tones off.

K * K

Press the key sequence to switch the ringer off for normal 
callers but leave it on for VIP contacts.
Pressing the key sequence again will switch off the ringer 
for all callers.

Once the ring tone has been switched off, the 

x

 symbol appears in the 

display.

*

Hold down the key to switch all ring tones on.

You can secure your telephone against unauthorised access by using the 
key lock. When the key lock is activated, all keys are locked, with the 
exception of the 

#

 key and the stored emergency number (see 

below). 

#

When the telephone is on standby, press and hold down 
the lock key.

Once the key lock has been switched on, the 

i

 symbol and the KEYS 

LOCKED message appear in the display. If the handset is lifted, the key 
lock is indicated by 

. 

#

Hold down the lock key.

There are two emergency numbers stored in the telephone by default 
(110, 112). You can store an additional emergency number with up to 32 
digits. These emergency numbers can also be selected when the key 
lock is switched on.

c 

Lift the handset. 

 is displayed.

~

Enter the emergency number.

K N 3

Activate setting mode for the emergency number. If an 
emergency number is already set, it is displayed. Hold 
down the 

u

 key to clear the number.

Q

 ... 

O

 / 

*

 / 

#

 / 

H

 / 

I

Enter the emergency number.

K

Press the set key or 

[

 to save your settings and exit the 

setting mode.

When direct calling is activated, the stored number (max. 32 digits) is 
dialled by pressing any key (except for the key sequence

K N 2

). 

K N 2

Activate setting mode for direct calling. 

Q

 ... 

O

 / 

*

 / 

#

 / 

H

 / 

I

Enter the direct calling number.

K

Press the set key or 

[

 to activate direct calling and exit 

the setting mode.

K N 2

Activate setting mode for direct calling. 

X

Hold down the 

u

 key to clear the direct call number.

K

Press the set key or 

[

 to deactivate direct calling and exit 

the setting mode.

You can block phone calls to specific dialling codes (e.g. chargeable 
codes), max. 3 numbers with 5 digits each.

K 2

Activate setting mode for blocking numbers. If a dialling 
code is already set, it is displayed. Hold down the 

u

 key 

to clear the entry.

Q

 ... 

O

Enter the dialling code to be blocked (max. 5 digits).

To edit the next dialling code:

v

Confirm with 

[

 and continue.

To save the settings:

K

Save your settings and exit the setting mode.

Note: The names of persons, whose numbers are stored in the phone-
book with the area code defined here, are no longer displayed. Change 
the appropriate phonebook entries, where necessary.