Fujitsu PRIMERGY TX300 S3 VFY:TX300S3-101GB Leaflet

Product codes
VFY:TX300S3-101GB
Page of 2
Data sheet 
⏐ Issue: December 14, 2006⏐ PRIMERGY TX300 S3 
Page 2 / 2 
 
 
 
Type 
Dual Socket Tower Server  
System board  
D 2129 
  Chip set 
Intel® 5000P 
  Processors 
Dual- or Quad-Core Intel® Xeon® (1 - 2) 
  Frequencies (GHz) 
5110 (1.60), 5120 (1.86) / 5130 (2.00), 
5140 (2.33), 5150 (2.66), 5160 (3.00) Dual-
Core oder E5310 (1,60), E5320 (1,86) 
Quad-Core 
  Front-Side-
Bus/Socket  
1066, 1333 MHz / 1066 (E53xx) 
Second-Level-Cache   4 (51xx), 2x 4 MB (E53xx), ECC 
Memory 
1 Gbyte up to max. 32 GByte 
4-way interleaved, FullyBuffered DIMM DDR2 FBD533 / FBD667; 
ECC; 8 slots divided into 2 branches with 2 channels each for 
PC2-4200F / 5300F modules with 512, 1, 2 and 4 GB; SDDC 
(Chipkill), Memory Mirroring option  
Flash-EPROM 
Local BIOS update with floppy disk; Remote BIOS-Update via LAN 
with Global Flash and service partition / RomPilot 
Interfaces  
  Serial 1 
1x RS-232-C (9-pin) (usable for iRMC or 
system) 
  Serial 2 
1x RS-232-C (9-pin) 
  Parallel (option) 
Centronics, 25-pin, EPP/ECP comp. 
  Keyboard, Mouse 
2x PS/2  
  USB 2.0 
1x front, 2x back (UHCI, 480 Mbit/s) 
2x internal for backup drives 
  Graphics 
1x VGA (15-pin) 
  LAN 
2x RJ45 (thereof 1x opt. Service LAN) 
Front Panel 
On/off button; NMI-, reset button; front LEDs for hard disks access 
(green), power (amber/green); front and back for system status 
(amber), identification (blue), 
Onboard controller **          
  IDE (ATA100) 
for 1 x DVD (integr. in Southbridge) 
  SAS (LSI1068) 
8-Port SAS controller with integrated RAID 
(0, 1, 1E).(Integrated Mirroring Enhanced 
also for odd numbered HD´s for Windows 
and Linux, SAS or SATA) 
  MegaRaid PCI  
  Express™  
  RoMB (option) 
(for SATA later) 
RAID Level 0, 1, 10, 5, 50 extension for 
onboard SAS RAID-controller with iButton 
(enable key) and 256MB Cache or 256MB 
iTBBU (Cache with integrated BBU). 
  LAN 
(BroadCom5715)  
2x 10/100/1000 Mbit/s Ethernet 
(PCE-Boot via LAN from PXE server)  
  Server 
management 
Integrated Remote Management Controller 
(iRMC) and graphics controller, IPMI 2.0   
Hard disk drives 
36, 73, 146, 300 Gbyte SAS or 
80, 160, 250, 500 Gbyte SATA (no mix) 
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 
I/O Slots (Standard) 
  1x PCIe x8 
  2x PCIe x8 (wired by 4) hot-plug 
  2x PCI-X 64-Bit/ 133 MHz 1x long, 1x short, 3.3 V   
Drive bays  
  for hard disks  
6x 3.5/1-inch, hot-plug, slide-in chassis;  
  for optional SAS 
  hard disks 
2x 3.5/1-inch, hot-plug, requires 2 bays for 
accessible drives 
  for accessible 
drives 
3x 5,25/1,6-inch free; or FDD-DVD-
LocalView-box with 2x 5,25/1,6-inch free 
and 1x 5,25/1,6-inch for LocalView, 0,5" 
DVD and 0.5" FD option or SAS/SATA 
HDD-box with 1x 5,25/1,6-inch free, and 2x 
5,25/1,6-inch for LocalView or 0,5" FD plus 
0,5" DVD option plus 2x 3,5/1-inch for SAS 
HDD 
System fans  
Hot-plug fans (2) as standard + 1 fan per CPU 
Redundant hot-plug fans (2+2) option  
 
Electrical values  
1x Hot-plug power supply unit as standard.  
Additional hot-plug unit for redundancy option  
Output power 
600 W  /  1 + 1 x 600 W  each 
Rated voltage range 
100 - 240 V  
Rated frequency 
50 - 60 Hz  
Max. rated current  
100 V - 240 V / 9.0 A – 3.5 A 
Rated current in  
basic configuration 
100 V - 240 V / 4.4 A - 1.5 A  
Active power 
798 W 
Apparent power 
809 VA 
max.heat dissipation 
2873 kJ/h  (2723 BTU) 
Temperature/Noise/Dimension/Weight 
  Ambient temperature 
10°C - 35°C (DIN IEC 721-3-3) class 3K2 
Declared noise emission  
according to ISO 9296 
  
     idle*      operating* (*ISO 7779) 
L
WAd
 (1 B = 10 dB) :  
    6,3 B          6,5 B  
L
pAm 
(bystander position):      45 dB         47 dB 
  Floor-stand (HxWxD) 
473 * 286 * 775 (mm) 
  Rack (HxWxD) 
177 * 483 * 770 (mm);  
Rack mounting depth 735 mm; 4 U 
  Weight  
ca. 25 - 40 kg (configuration dependent) 
Compliance with Norm and Standards  
 Product safety 
  Global / Europe 
IEC 60950-1 / EN 609501- 
  USA 
UL 60950-1 
  Canada 
CAN/CSA C22.2 No. 60950-1-03 
 Electro magnetic compatibility 
  Europe 
EN 55 022 class A, EN 55024,  
EN 61000-3-2 / 3-3 
  Taiwan / Japan 
CNS 13438 class A / VCCI class A 
  Australia / New Zealand  AS / NZS CISPR 22 class A 
  USA / Canada 
FCC class A 
 Declaration of conformity                
  Europe (CE)  
89/336/EEC(EMI);73/23 EEC(LVD) 
  North America  
FCC class A  
Approvals  
 Product safety  
  Global / Europe 
CB / CE 
  USA / Canada 
CSA
US
 / CSA
C
There is general compliance with the safety requirements of all 
European countries and North America. National approvals required 
in order to satisfy statutory regulations or for other reasons, can be 
applied for on request. 
Supported operating systems 
  Microsoft: Windows 2003 R2 Standard, Enterprise IA32 Edition;  
  Microsoft: Windows 2003 R2 Standard, Enterprise x64 Edition; 
Microsoft Windows 2003 Web Edition 
Microsoft Small Business Server 2003 R2 Stand./Premium Edit.* 
  Microsoft: Windows 2000 Advanced Server; Server 
  VMware: ESX Server 2.5 but not for 5300 Xeon; Infrastructure 3 
  SUSE:  Enterprise Server 9, 10, 10 with Xen (x86 / EM64T)  
  Red Hat: Enterprise Linux 3 and 4 for X86 / EM64T 
** For supported controllers (onboard and PCI cards for SCSI, RAID, 
LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
Server Management (see separate data sheets) 
  Standard:  
PRIMERGY ServerView Suite;  
PDA, ASR&R  
  Optional:  
LocalView, RemoteView,  
iRMC Advanced Pack 
 
 
All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 
© Fujitsu Siemens Computers, 12/2006 
  Published by  
 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/
Company stamp