LANDE 16U 19'' LN-WM16U6060-CC-11 User Manual

Product codes

LN-WM16U6060-CC-11

FEATURES of Rear Wall Section:

All Lande NETbox Wall Cabinets are proper for Rear Section

Unit.

Rear Section is Heavy Duty Welded framed construction. 2,0mm

thickness material welded as multi layer system creates at wall

fixing provision a thickness of 4,0mm.

A PVC cable entry gland plate is available at the wall side

welcomes if any cable comes up from wall, and back section to

be align directly to the provision of cable run through.

19’’ provision located at rear section module, which allows if any

passive less depth cabling component needs to be housed, while

the cable bundles could be housed inside the 100mm depth empty

housing box.

Triangular, positioning brackets buried into the 100mm rear

housing box for allignment and raising a heavy load capability.

Spanner style special locking mechanism captures the rear

100mm box, in the welded 50mm depth frame, which integrates

the rear section to the main NETbox wall cabinet.

Top and Bottom of the rear section module has cable entry

cut-outs closed with Brushed cable entry provisions.

A spesific flange system designed for heavy duty structure,

where 50kgs of front NETbox wall cabinet total load is being

carried without any problem. The 50 kgs of load capacity exists

and performs while cabinet is in swinging position.

*** 50 kgs load capacity measured at integrated frontal wall

cabinet of d:450mm

NETbox Rear Section Module, can be integrated to d:450mm

version wall mounting cabinet, which overall cabinet dimention

to be 450+150=600mm, the load capacity is 50kgs

Once a deeper equipment to be fitted for the same purposes,

NETbox Rear Section can be integrated to d:600mm version wall

mounting cabinet, which overall cabinet dimention to be

600+150=750mm, the load capacity is loosing at a rate of % 30,

than 35 kgs of load could be operated at swinging position.

*** At 600 + 150mm configuration, recommended to use for free

standing purposes.

NETbox Rear Section Units are being sold as a seperate Unit,

later to be integrated to any of available NETbox wall mounting

cabinet. This feature simply offers a flexibility and availability

since if there is stocked wall mounting cabinet available in

warehouses, customer should need to order only the Rear Section

Unit. After removing the rear panel of existing Wall mounting

cabinet, only 4 screws to be tighten again for integration of Rear

Section Unit.

NETbox Rear section swinging direction could be managed

easily, due to assemly placement availability, openning left to

right or right to left is not a problem.

Lande NETbox Rear Sections are in RAL 7016 Anthracite

Grey color from stock.

19” NETbox Double Section for

WA L L M O U N T I N G C A B I N E T S