Altronix EBRIDGE1CR Leaflet

The eBridge1CRT - IP over Coax transceiver and receiver kit is designed to enable fast 
10/100Base-T Ethernet digital communication over coax cable. These plug and play 
units facilitate system upgrades from analog to IP cameras/devices utilizing existing 
legacy Coax and eliminating the costs and labor associated with installing new network 
cabling. In addition data transmission is extended to 2,000’ (over five times the 100m/328’ 
Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit 
Composite Video Signal with Ethernet data simultaneously.

•  12VDC to 24VDC Class 2 power supply (polarity not

 observed) or 16VAC to 24VAC Class 2 plug-in

 transformer.

•  12VDC/275mA, 24VDC/110mA,

 16VAC/375mA, 24VAC/200mA.

•  Incorporates *sloc

TM

 (Security Link over Coax)

 technology.

•  Connectivity: RJ45, auto-crossover.

•  Wire type: 4-pair Cat-5 or higher structured cable.

•  Distance: up to 328 ft. (100m).

•  Speed: 10/100BaseT, half/full duplex, auto negotiation.

•  Throughput is rated to pass 25mbps of data at

 distances up to 1500 ft. With proper headend

  equipment, multiple Megapixel cameras can be used.

•  Distance: up to 1,500 ft.

•  Connectivity: BNC, RG-59/U or similar.

•  Blue LED - Coax link connection.

•  Yellow and Green LED (RJ45) IP Link status,

 10/100Base-T/active.

•  Green LED - Power.

•  Operating Temperature:

 14ºF to 122ºF (--- 10ºC to +50ºC).

•  Storage Temperature:

  -- 22º to 158ºF (--- 30º to +70ºC) Storage.

•  Humidity: 20 to 85%, non-condensing.

•  BTU/Hr.:

 -  VDC: 1.69 - 4.46 BTU/Hr.

•  BTU/Hr.:

 -  VAC: 2.46 - 3.07 BTU/Hr.

•  Composite video cables (included) - enables

  simultaneous composite video signal over the

  same Coax.

•  Two (2) power connectors.

•  Retrofit digital IP cameras in an analog CCTV

 installation.

•  Works with Megapixel, HD720, HD1080 and VGA

 (SD) cameras.

•  Extend Network link distance in an industrial

 environment.

•  Upgrade deployed CCTV Coax to a digital network

  for Retail, Casinos, Airports, Schools, Hospitals, etc.

•  Enables simultaneous transmission of composite and

  digital IP video.

•  Lightweight molded fiberglass reinforced polyester

  enclosure is corrosion resistant and does not contain 

 halogens.

•  Dimensions (W x L x H approx.):

 2.5” (63.5mm) x 3.8” (96.52mm) x 1” (25.4mm)

•  Product weight (approx.): 4 oz. (0.11 kg).

•  Shipping weight (approx.): 7 oz. (0.17 kg).

•

eBridge1CR: Single port ethernet receiver

  (use with eBridge transceiver).
•

eBridge1CT: Single port ethernet transceiver

  (use with eBridge receivers).
•

eBridge1CRT: Single port ethernet receiver and

 transceiver kit.
•

eBridge4CR: Four (4) port ethernet receiver.

•

eBridge16CR: Sixteen (16) port ethernet receiver.

 

     

Rev. DSeBridge1CRT_04042013

European Conformity

UL/CUL Listed for Information

Technology Equipment (UL 60950-1).

C-Tick Approved - Z1409

eBridge1CR

and eBridge1CT

* sloc is a registered trademark of Intersil Corporation.