Altronix EBRIDGE16CR Leaflet
The eBridge16CR is a 16 channel ethernet over coax rack mount receiver.
The eBridge16CR enables fast 10/100Base-T Ethernet digital communi-
cation to be transmitted over coax cable. This unit is designed to be used
with eBridge1CT transceivers. This plug and play unit facilitates system
upgrades from analog to IP cameras/devices utilizing existing legacy
Coax and eliminating the costs and labor associated with installing new
network cabling. In addition the use of coax enables data transmission to
be extended over 1500’ (over four times the 100m/328 ft Ethernet maxi-
The eBridge16CR enables fast 10/100Base-T Ethernet digital communi-
cation to be transmitted over coax cable. This unit is designed to be used
with eBridge1CT transceivers. This plug and play unit facilitates system
upgrades from analog to IP cameras/devices utilizing existing legacy
Coax and eliminating the costs and labor associated with installing new
network cabling. In addition the use of coax enables data transmission to
be extended over 1500’ (over four times the 100m/328 ft Ethernet maxi-
mum length), eliminating the need for repeaters. At the same time the units can combine Composite Video Signal
with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.
with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.
Compliant:
• Incorporates *sloc
TM
(Security Link over Coax)
technology.
Input:
• 24VDC to 56VDC UL Listed Class 2 power supply
(polarity not observed) or UL Listed 24VAC Class 2
plug-in transformer.
(polarity not observed) or UL Listed 24VAC Class 2
plug-in transformer.
Power Consumption:
• 24VDC/1500mA, 56VDC/700mA,
24VAC/2200mA.
24VAC/2200mA.
Ethernet:
• Sixteen (16) RJ45 ethernet channels.
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or higher structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or higher structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
Coax:
• Sixteen (16) BNC input channels.
• Sixteen (16) BNC composite video output channels.
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
• Sixteen (16) BNC composite video output channels.
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Blue LED - Coax link connection.
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• Green LED - Power.
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• Green LED - Power.
Environmental:
• Operating Temperature:
14ºF to 122ºF (--- 10ºC to +50ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
14ºF to 122ºF (--- 10ºC to +50ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
Electrical:
• BTU/Hr.:
- 24VDC: 18.43 BTU/Hr.
- 56VDC: 20.06 BTU/Hr.
- 24VAC: 27.02 BTU/Hr.
- 24VDC: 18.43 BTU/Hr.
- 56VDC: 20.06 BTU/Hr.
- 24VAC: 27.02 BTU/Hr.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Simultaneously use Composite Video matrix switch
for monitor display and control, while the NVR
is used for digital IP camera recording.
• eBridge is rated to pass 25mbps of data at distances
up to 1500 ft. With proper headend equipment,
multiple Megapixel cameras can be used.
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Simultaneously use Composite Video matrix switch
for monitor display and control, while the NVR
is used for digital IP camera recording.
• eBridge is rated to pass 25mbps of data at distances
up to 1500 ft. With proper headend equipment,
multiple Megapixel cameras can be used.
Mechanical:
• 1U rack mount chassis for use in standard
EIA 19” rack.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 6.17 lbs. (2.8 kg).
• Shipping weight (approx.): 7.47 lbs. (3.39 kg).
EIA 19” rack.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 6.17 lbs. (2.8 kg).
• Shipping weight (approx.): 7.47 lbs. (3.39 kg).
Units available individually:
•
eBridge1CT: Ethernet transceiver enables IP
video/data over Coax.
Unit operates with eBridge1CR and eBridge16CR
receivers.
Unit operates with eBridge1CR and eBridge16CR
receivers.
eBridge16CR -
IP over Coax Receiver
Rev. DSeBridge16CR_04042013
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Overview
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
European Conformity
* sloc is a registered trademark of Intersil Corporation.
eBridge16CR
C-Tick Approved - Z1409