Altronix Netway1EV NETWAY1EV Leaflet

•  230VAC, 50/60Hz, 0.8 amp.

•  One (1) PoE port provides power and passes data
 over ethernet (CAT5) cable up to 100m (328 ft.).
•  Data rate: 10/100/1000Base-T.

•  IEEE 802.3af (15W) & IEEE 802.3at (25W)
 compliant.
•  Short circuit and overload protection.
•  Supports LTPoE++™ 70W, 52.7W & 38.7W PD
 compliant devices up to 100m (328’).

•  Auto detection and protection of legacy
 non-PoE cameras/devices.

•  Port status LEDs.
•  Manual PoE shutdown (Spring terminals).
•  IEC 320 - 3-wire grounded line cord (detachable).

•  Operating temperature:
 85W -20º C to 49º C ambient.
 55W -20º C to 55º C ambient.
•  32 BTU/Hr.
•  System AC input VA requirement: 172.5VA.

•  Unit can be wall or shelf mounted.
•  Enclosure Dimensions (H x W x D approx.):
 1.625” (41.275mm) x 4” (101.6mm)
 x 7.25” (184.15mm)
•  Product weight (approx.): 2.2 lbs. (1.0 kg).
•  Shipping weight (approx.): 3.2 lbs. (1.45 kg).

European Conformity

UL/CUL Listed for Information

Technology Equipment (UL 60950-1).

Netway1EV  is  an  enhanced  10/100/1000Base-T  PoE++  midspan  power  injector.  It
is fully compliant and backwards compatible with PoE (15W) and PoE+ (25W) PoE
devices. The NetWay1EV is also capable of sourcing up to 85W with devices incor-
porating LTPoE++™ 70W, 52.7W & 38.7W requiring up to 70W of power at up to
100m (328’).

Rev. DSNetWay1EV_04262013

Structured

Cable from

Network Switch

12VAC to 24VAC or

5VDC to 24VDC input

for Remote Manual

PoE Shutdown

Structured

Cable to

IP Camera

NetWay1EV