APC NetBotz 320 Rack Appliance NBRK0320E User Manual

c. When you have finished creating your Advanced Schedule, click OK to save the schedule and 

return to the Periodic Report task. 

5. When you are finished, click OK to save any changes to the appliance. Click Cancel to close this 

window without saving any changes.

To configure your appliance to periodically generate and deliver sensor reports to a specified FTP server:

1. Select Periodic FTP Report from the Periodic Reports Configuration window and then click Edit.

2. The Edit Periodic FTP Report window opens. This window contains the following fields:

Enabled

Check this check box to enable periodic FTP reporting.

Include camera pictures

Check this check box to include current image captures by 
Camera Pod 120s connected to the appliance in the FTP post. 

Include Maps

Check this check box to include any maps that are stored on the 
appliance in the FTP post. 

Include Graphs

Check this check box to include graphs of the sensor readings 
for all sensors that are associated with the appliance in the FTP 
post. 

Interval

The frequency with which FTP reports will be generated.

Sensor Priority

Acts as a filter that can be used to limit the amount of sensor 
data that is included with the periodic report. You can select 
High, Medium, or Low priority settings:
• High: Only sensor data associated with physical sensors that 

are integrated with or connected to the appliance are included 
in the report. Sensor data associated with remote devices, 
such as MIB II data gathered from remote targets using Basic 
Device Crawlers and Advanced Data that is gathered using 
add-on applications such as Advanced Device Crawlers, is not 
included in the report.

• Medium: Sensor data associated with physical sensors and 

with Advanced Data sensor sets from remote devices (such as 
that which is gathered using Advanced Device Crawlers) is 
included in the report. Data associated with remote devices 
that is not grouped in an Advanced Data sensor set, such as 
MIB II data gathered from remote targets using Basic Device 
Crawlers, is not included in the report.

• Low: Sensor data from all sensors is included in the report.

FTP Hostname

The hostname or IP address of the FTP server to which the 
report will be delivered.

User ID

The user ID that will be used, along with the FTP Password, to 
gain access to the specified FTP server.

FTP Password

The password that will be used, along with the User ID, to gain 
access to the specified FTP server.

Confirm Password

Type the FTP Password here again to confirm the password.