Fujitsu MX130 S2 VFY:M1302SC435IN Data Sheet
Product codes
VFY:M1302SC435IN
Data Sheet
FUJITSU Server PRIMERGY MX130 S2 Mirco Server
Page 3 / 6
www.fujitsu.com/fts
Technical details
Mainboard
Mainboard type
D3090
Chipset
AMD 880G
Processor quantity and type
1 x AMD Athlon™ II / AMD Opteron™ 3000 series / AMD FX series
Processor
AMD Athlon™ II X2 220
(2 Cores, 2.8 GHz, SLC: 1 MB)
AMD Opteron™ 3350
(8 Cores, 2.8 GHz, TLC: 8 MB)
(2 Cores, 2.8 GHz, SLC: 1 MB)
AMD Opteron™ 3350
(8 Cores, 2.8 GHz, TLC: 8 MB)
Memory slots
4
Memory slot type
DIMM (DDR3) ECC
Memory capacity (min. - max.)
2 GB - 16 GB
Memory protection
ECC
Memory notes
Mix and match possible, with dual channel operation better performance (2 modules with equal capacity necessary).
Single channel (1 module) configuration possible.
Single channel (1 module) configuration possible.
Memory options
2 GB (1 module(s) 2 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, ECC, 1333 MHz, PC3-10600, DIMM
Interfaces
USB 2.0 ports
12 (2 x front, 6 x back, 4 x internal)
DVI
1 (Dual link DVI-I), ATI Radeon® HD 4250 (up to 2811MB) on board
Graphics (15-pin)
1 No dedicated 15-pin VGA port available. VGA is available via the supplied DVI to VGA adapter.
Audio: line-in
1
Audio: line-out
1
Audio: microphone
1
Audio: comments
For projects only
Serial connection
1 9pin, 16 byte FIFO, 16550 compatible
Mouse / Keyboard (PS/2)
2
LAN / Ethernet (RJ-45)
1 Gbit/s Ethernet
I/O controller on board
RAID controller
6 port SATA with RAID 0/1/10 for HDDs
SATA Controller
SATA II
LAN Controller
BCM 57780, 10/100/1000 Mbit/s Ethernet, PXE-Boot by LAN via PXE-Server
Trusted Platform Module (TPM)
Infineon / 1.2 (option)
Slots
PCI-Express 2.0 x4
1 x Low profile max. length 180mm
PCI-Express 2.0 x16
1 x Low profile max. length 180mm
PCI-Express x1
1 x Low profile max length 85mm
PCI-slots
1 x Low profile max. length 180mm
Slot Notes
PCI 32/33 MHz, 3.3V/5V
Drive bays
Storage drive bays
3.5-inch non hot-plug SATA
Storage drive bay configuration
Max 4 (2+2) x 3.5-inch (2 x Easy Change, 2 x screw-in)
On project request through Fujitsu sales alternatively 2.5-inch configurations possible
On project request through Fujitsu sales alternatively 2.5-inch configurations possible
Accessible drive bays
1 x 5.25/1.6-inch for slimline ODD and 3.5-inch HDD (internal), or backup devices, or 1.6-inch height ODD, or 3.5-
inch HDD (internal)
1 x 5.25/0.5-inch for slimline ODD, or 1 x 3.5-inch HDD (internal)
inch HDD (internal)
1 x 5.25/0.5-inch for slimline ODD, or 1 x 3.5-inch HDD (internal)
Notes accessible drives
All possible option described in System Architect.
Number of fans
3
Fan configuration
Front-fan, CPU-fan, PSU-fan