Alpine CDA-137BTi CDA-137BTI User Manual
Product codes
CDA-137BTI
10
-EN
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
after changing the car battery, etc.
1
Turn off the unit power.
2
Press
y (OPEN) to open the front panel, and then remove
it.
3
Press RESET with a ballpoint pen or similar pointed object.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
obtained.
Setting the Time and Calendar
1
Press and hold SETUP for at least 2 seconds to activate the
SETUP selection mode.
SETUP selection mode.
2
Turn the Rotary encoder to select the General mode, and
then press
then press
ENTER.
Bluetooth General Display Tuner USB Bluetooth
3
Turn the Rotary encoder to select Clock Adjust, and then
press
press
ENTER.
4
Turn the Rotary encoder to set year.
5
Press
ENTER.
6
Repeat steps 4 and 5 above to set month, date, hour and
minute.
minute.
7
Press and hold SETUP for at least 2 seconds to return to
normal mode.
normal mode.
Notes
• Pressing returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is cancelled.
• To synchronise the clock to another clock/watch or radio time
• If no operation is performed for 60 seconds, SETUP is cancelled.
• To synchronise the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
setting the “hour”. Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
Setting the Dimmer Control
Press and hold DIMMER for at least 2 seconds to select the
DIMMER mode.
DIMMER mode.
The mode will change every time the button is pressed and held.
Dimmer Auto Dimmer On Dimmer Off Dimmer Auto
Dimmer Auto mode:
Decrease the illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you feel the unit’s
backlighting is too bright at night.
lights of the vehicle ON. This mode is useful if you feel the unit’s
backlighting is too bright at night.
Dimmer On mode:
Keep the illumination brightness of the unit dark.
Dimmer Off mode:
Keep the illumination brightness of the unit bright.
RESET switch