Transition Networks SGPOE1040-100 SGPOE1040-110-EU Leaflet

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications

Standards

IEEE Std. 802.3™, IEEE Std. 802.3af

Switches

SW1: Auto-Negotiation TP On/Off
SW2: Speed TP: Force 10Mbps or 100Mbps (SW1 off)
SW3: Duplex TP: Force Half or Full Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full Duplex
SW5: AutoCross™ On/Off
SW6: PSE On/Off
SW7: PSE/LPT on/off
SW8: Unused

Max Packet Size

1632 bytes untagged
1628 bytes tagged

MAC Addresses

8K

Dimensions

Width: 4.4" [112 mm]
Depth: 5.1" [129 mm]
Height: 1.0" [25 mm]

Power

90 – 250VAC external power supply
External AC/DC required; 48vdc 0.67A

Power Consumption

20W max.

Operating Temperature

0 – 40°C [32° – 104°F]

Storage Temperature

-25° to +85°C [-13° to +185°F]

Environment

5% – 95% humidity non-condensing; 0 – 10,000 ft. al-
titude

Shipping Weight

2 lbs. [0.90 kg]

Compliance

EN55022:1994+A1:1996+A2:1997 Class A; FCC Part
15 Subpart B; 
UL 1950

Warranty

Lifetime

Ordering Info

10/100/1000BASE-T (RJ-45) 

to 1000BASE-SX 850nm MM (SC)

10/100/1000BASE-T (RJ-45) 

to 1000BASE-LX 1310nm SM (SC)

10/100/1000BASE-T (RJ-45) 

to 100/1000BASE-X SFP Slot (empty)

10/100/1000BASE-T (RJ-45) 

to (2) 100/1000BASE-X SFP slots (empty)

Optional Accessories

(sold separately)

DIN Rail Mount Bracket 5.0" [127 mm]

Wall Mount Bracket 4.0” [102 mm]

AUTO NEG

AUTO CROSS LINK PASS THRU LINK RESTORE

AUTO

Power over Cat5 to Remotely Located Devices

stand-alone media converter

Features



SFP ports support either 100Base or 

1000Base fiber



Redundant SFP port option



IEEE802.3af Power-over-Ethernet Compatible



48 VDC PSE Output Voltage



Mode A or Mode B Pairs Power Insertion



PD Detection Signature



PoE Legacy Detect for non-IEEE 802.3af 

compatible Powered Devices (PD)



Over-Current Protection & Under-Current Detection



Powered Device Reset



Switch selectable features and port settings



Minimum Load Sensing



Fault Protection Input



Auto-Negotiation 



AutoCross™ 



Link Pass Through available on SGPOE10xx-100



Automatic Link Restoration 



External AC power supply

Enables enterprises to provide power to network de-
vices over the existing CAT5 data connection.

Transition's AC powered PoE media converters combine
data received over a fiber optic link with -48VDC power;
providing power to Data Terminal Equipment (DTE)
Power Devices (PD) over unshielded twisted pair cable.
The PoE converters are Power Sourcing Equipment
(PSE) and are fully compatible with Powered Devices
(PD) that comply with the IEEE802.3af™: 2003 stan-
dard. The converters also include a PD signature sens-
ing and power monitoring features per the IEEE 802.3af
standard. Other features include Over-Current Protec-
tion, Under-Current Detection and Fault Protection
Input.

This feature enhanced model offers the ability to en-
able/disable many of the features as well as force port
capabilities (see switch section under specifications to
the right).

In addition, with the PSE/LPT switch enabled, a loss of
Fiber RX will disable PSE power output on the UTP port
for 2 seconds to allow remote device to re-initialize.
Also known as Powered Device Reset.

The PoE converter is fully compatible with devices that
comply with the IEEE802.3af standard as well as select
legacy PD’s. The PoE converter is capable of inserting
power on data mode A or mode B pairs of the MDI.