Intel SC5299WS User Manual

Page of 154
Regulatory, Environmentals, and Specifications 
Intel
®
 Entry Server Chassis SC5299-E TPS 
  
Revision 
3.1 
Intel order number D37594-005 
132 
3.  Name of Certification Recipient: Intel Corporation 
4.  Date of Manufacturer: Refer to date code on product 
5.  Manufacturer/Nation: Intel Corporation/Refer to country of origin marked on product 
9.3  Regulated Specified Components 
To maintain the UL listing and compliance to other regulatory certifications and/or declarations, 
the following regulated components must be used and conditions adhered to. Interchanging or 
use of other component will void the UL listing and other product certifications and approvals. 
ƒ  Server Chassis - (Base chassis is provided with power supply and fans)
  UL listed. 
ƒ  Server board - Must use an Intel
®
 server board—UL recognized. 
ƒ  Add-in boards - Must have a printed wiring board flammability rating of minimum 
UL94V-1. Add-in boards containing external power connectors and/or lithium batteries 
must be UL recognized or UL listed. Any add-in board containing modem 
telecommunication circuitry must be UL listed. In addition, the modem must have the 
appropriate telecommunications, safety, and EMC approvals for the region in which it 
is sold. 
ƒ  Peripheral Storage Devices - must be UL recognized or UL listed accessory and 
TUV or VDE licensed. Maximum power rating of any one device is 19 watts. Total 
server configuration is not to exceed the maximum loading conditions of the power 
supply. 
9.4  End of Life/Product Recycling 
Product recycling and end-of-life take back systems and requirements vary from country to 
country. Contact the retailer or distributor of this product for information on product recycling 
and/or take back. 
9.5  Restriction of Hazardous Substances (RoHS) Compliance 
Intel has a system in place to restrict the use of banned substances in accordance with the 
European Directive 2002/95/EC. Compliance is based on declaration that materials banned in 
the RoHS Directive are either (1) below all applicable substance threshold limits, or (2) an 
approved/pending RoHS exception applies. 
Note: RoHS implementing details are not fully defined and may change. 
Threshold limits and banned substances are noted as follows: 
ƒ  Quantitiy limit of 0.1% by mass (1000 PPM) for: 
- Lead 
- Mercury 
- Hexavalent 
Chromium 
Polybrominated Biphenyls Diphenyl Ethers (PBDE, PBB) 
ƒ  Quantity limit of 0.01% by mass (100 PPM) for: