Intel SC5299WS User Manual

Page of 154
Power Sub-system 
Intel
®
 Entry Server Chassis SC5299-E TPS 
  
Revision 
3.1 
Intel order number D37594-005 
60 
Table 68. PSKILL Signal Characteristics 
Signal Type (Input Signal to Supply) 
Accepts a ground input from the system. Pull-up to VSB 
located in the power supply. 
PSKILL = Low, PSON
#
 = Low 
ON 
PSKILL = Open, PSON
#
 = Low or Open 
OFF 
PSKILL = Low, PSON
#
 = Open 
OFF 
 
MIN MAX 
Logic level low (power supply ON) 
0V 
1.0V 
Logic level high (power supply OFF) 
2.0V 
5.25V 
Source current, Vpskill = low 
 
4mA 
Delay from PSKILL=High to power supply 
turned off (T
PSKill
)1 
 
100
  s 
a. T
PSKill
 is the time from the PSKill signal de-asserting HIGH to the power supply’s output inductor discharging. 
 
2.3.5.3 
PWOK (Power OK) Output Signal 
PWOK is a power OK signal and is pulled HIGH by the power supply to indicate that all the 
outputs are within the regulation limits of the power supply. When any output voltage falls below 
regulation limits or when AC power has been removed for a time sufficiently long so that power 
supply operation is no longer guaranteed, PWOK will be de-asserted to a LOW state. The start 
of the PWOK delay time is inhibited as long as any power supply output is in current limit. 
Table 69. PWOK Signal Characteristics 
Signal Type
 
Open collector/drain output from power supply. Pull-up 
to VSB located in system. 
PWOK = High 
Power OK 
PWOK = Low 
Power Not OK 
 
MIN 
MAX 
Logic level low voltage, Isink=4mA 
0 V 
0.4 V 
Logic level high voltage, Isource=200
  A 
2.4 V 
5.25 V 
Sink current, PWOK = low 
 
4 mA 
Source current, PWOK = high 
 
2 mA 
PWOK delay: T
pwok_on
 
100 ms 
1000 ms 
PWOK rise and fall time 
 
100 
  s 
Power down delay: T 
pwok_off
 
1 ms 
200 ms