Colorovo Power box 6800 CVP-PB-6800-BK User Manual

12

PowerBox 6800

Charging the battery

1.  Insert the included cable into the microUSB (IN) port in the battery. Con-

nect the other end of the cable to the USB port on your computer. The 
battery indicator LEDs will light up sequentially.

2. When fully charged, the battery indicator light will go out.
Info:

      Before first use, three cycles of full charge and discharge are required for 

the battery to reach optimum performance.

     It takes several hours to fully charge the battery.
     Charge the battery at least once a month to maintain its efficiency.
     Charge the battery from a computer connected to a power supply.
     The battery supports charging from solar batteries.
      Disconnect the unused charger from its socket to reduce unnecessary 

power consumption.

Charging devices

1.  Select an appropriate plug for the device and place it on the included USB cable.
2.  Insert it into one of the two USB (OUT) ports in the battery matching the 

current required for the device (1A or 2A).

3. Connect the other end of the cable to the device.
4.  Briefly press the power button to switch on the battery and start charging.
Info:

     You can use the USB cable included with the device.
     Do not insert the plug with excessive force.

Battery level

To check the battery level:
1. Briefly press the power button.

     All LEDs are off – the battery is fully discharged
     1 LED is on – approx. 25%
     2 LEDs are on – approx. 50%
     3 LEDs are on – approx. 75%
     4 LEDs are on – approx. 100%