Panasonic PT-DS20KEJ User Manual

PT-DS20K

3-Chip DLP

™

Projector

As of April 2013

SFD12M006-2

4 / 1 8

REMOTE 2 IN

LAN

Power cord length

Cabinet materials

Dimensions (W × H × D):

Weight*

Operation noise*

Operating temperature

Operating humidity

Remote control unit

Power supply

Operation range*

Dimensions (W × H × D)

Weight

Supplied accessories

Optional accessories

Zoom lens (1.0 – 1.2:1)

Zoom lens (1.4 – 1.8:1)

Zoom lens (1.8 – 2.6:1)

Zoom lens (2.6 – 5.1:1)

Zoom lens (5.0 – 8.0:1)

Zoom lens (7.9 – 15.0:1)

Fixed-focus lens (0.8:1)

Lens motor cover

Ceiling mount bracket

Frame

Smoke cut filter

Upgrade kit

Replacement lamp unit

Replacement lamp unit for portrait mode

Replacement filter unit

D-sub 9-pin (female) × 1 for external control (parallel)

RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant

with PJLink™ (class 1)

3.0 m (9

ft 10 in)

Molded plastic

620 × 291*

× 800*

(24-7/16 × 11-15/32*

× 31-1/2*

inches) (without lens)

Approx. 43 kg (94.8 lbs) (without lens)

49 dB (quad lamp operation)

0°– 45°C (32°–113°F) *

10%– 80% (no condensation)

3 V DC (AA/R6 type battery × 2)

Approx. 30 m (98

ft 5 in) when operated from directly in front of the

signal receptor

51 × 176 × 28 mm (2 × 6-15/16 × 1-3/32 inches)

Approx. 134 g (4.7 oz) (including batteries)

Power cord with security lock (× 1)

Wireless/wired remote control unit (× 1)

Batteries for remote control (AA/R6 type × 2)

Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring

& Control Software) (× 1)

ET-D75LE6

ET-D75LE10

ET-D75LE20

ET-D75LE30

ET-D75LE40

ET-D75LE8

ET-D75LE50

ET-D75MC1

ET-PKD510H (for high ceilings)

ET-PKD510S (for low ceilings)

ET-PFD510

ET-SFR510

ET-UK20

ET-LAD510 (one bulb)

ET-LAD510F (a set of four bulbs)

ET-LAD510P (one bulb)

ET-LAD510PF (a set of four bulbs)

ET-EMF510

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-

nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.

*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Up to a total of ±55° during simultaneous horizontal and vertical correction.

*4 WUXGA  resolution  is  supported  only  when  the  signals  are  compliant  with  VESA  CVT-RB  (Coordinated  Video  Timing-Reduced  Blanking).
*5 With  legs  at  shortest  position.
*6 Excluding  the  optional  lens.
*7 Average  value  (excluding  the  optional  lens).  May  differ  depending  on  models.
*8 The  operating  temperature  range  is  0  °C  to  40  °C  (32  °F  to  104  °F)  when  the

FAN CONTROL

is set to

HIGH ALTITUDE MODE

(for altitudes from 1,400 m

to  2,700  m  (4,593  ft  to  8,858  ft)  above  sea  level).  When  the  projector  is  used  with  the  ET-SFR510  Smoke  Cut  Filter,  the  operating  temperature
range  is  0  °C  to  35  °C  (32  °F  to  95  °F),  and  the  projector  cannot  be  used  in  places  at  high  altitude.  The  operating  temperature  range  is  0  °C  to
40  °C  (32  °F  to  104  °F)  when  the  ET-LAD510P/LAD510PF  lamp  is  mounted  and  the  projector  is  used  in  portrait  configuration.  The  operating  tem-
perature  range  is  0  °C  to  35  °C  (32  °F  to  95  °F)  when  the

FAN CONTROL

is set to

HIGH ALTITUDE MODE

(for altitudes from 1,400 m to 2,700 m (4,593 ft

to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C
(32 °F to 86 °F).

*9 Operation range differs depending on environments.