Wilson Electronics Glass Mount Antennas 301102 User Manual

Wilson Electronics Glass Mount and Mini Glass-Mount antennas will collect the 

cell tower signal and send it through the cable to a Signal Booster or directly to 

the cell phone or cellular data card. When the cell phone or cellular data card 

transmits, the signal is transferred to a Signal Booster or directly to the antenna 

and broadcast back to the cell tower.

An 18-inch external adapter is required to connect the cellular device to the 

antenna. The external adapter is cell phone/data card-specific and may be 

purchased through a local retailer. Refer to Wilson Electronics Adapter Guide to 

identify the right adapter for your cell phone or cellular data card. The Adapter 

Guide is available on our web site, www.WilsonElectronics.com, or you may call 

Technical Support at 866-294-1660.

The antenna may be mounted along 

the top of the front or rear window.   

For best performance, don’t mount on 

the rear window of trucks or SUVs.
Check to ensure your mounting 

location will not interfere with 

windshield wiper operation.
Keep the antenna away from defogger 

wires and metallic aftermarket window 

tint - most factory tint is nonmetallic 

and will not interfere.  If the antenna 

must be mounted on the defogger, 

center it between the defogger wires 

as much as possible.
Clean the outside window surface 

with glass cleaner or the alcohol swab 

included in your package.  Be sure the 

same location inside the window is 

clear of obstacles.

Avoid 

Defogger 

Wires

Possible Mounting 

Locations

A Wilson Electronics Signal Booster (sold separately), when used in conjunction 

with your antenna, can improve your cellular device coverage significantly.  

Wilson Electronics manufactures a wide range of wireless and Direct-Connect 

Signal Boosters for mobile or in-building use.  See your dealer for details or visit 

www.WilsonElectronics.com.