Panasonic PT-DZ680EK PT-DZ680EKJ User Manual
Product codes
PT-DZ680EKJ
S
P
E
C
F
I
L
E
PT-DZ680K/DZ680S/DZ680LK/DZ680LS
DLP
™
Projectors
As of October 2012
SFD12M014
1 6 / 1 7
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
following precautions.
1.
Never place objects on top of the projector.
2.
Make sure there is an unobstructed space of 500 mm (1 feet 8 inches) or more around the projec-
tor’s exhaust openings.
tor’s exhaust openings.
3.
Do not stack projector units directly on top of one another for the purpose of multiple (stacked)
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them. These space requirements also apply to installations where only one projector unit
is operating at one time and the other unit is used as a backup.
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them. These space requirements also apply to installations where only one projector unit
is operating at one time and the other unit is used as a backup.
4.
Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro-
jector so that cool or hot air from other air conditioning equipment does not flow directly toward
the projector’s air intake or exhaust openings.
jector so that cool or hot air from other air conditioning equipment does not flow directly toward
the projector’s air intake or exhaust openings.
5.
Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
6.
If the projector is placed in a box, ensure that the projector’s intake and exhaust openings are not
blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the
intake openings.
blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the
intake openings.
7.
When installing the projector in any manner other than floor mounting with the adjuster legs, use
the five threaded ceiling mount holes (screw diameter: M6, projector interior thread length: 12 mm)
to secure the projector.
the five threaded ceiling mount holes (screw diameter: M6, projector interior thread length: 12 mm)
to secure the projector.
500 mm (1 f t 8 in )
or more
or more
500 mm (1 f t 8 in )
or
or
more
500 mm (1 f t 8 in )
or more
or more
100 mm
( 3-15 /16
( 3-15 /16
in )
or more
Direction of air intake and exhaust
Intake
Exhaust
Do not stack
projector units
directly on top
of one another.
projector units
directly on top
of one another.
Do not support
the projector unit
by its top while
it is in use.
the projector unit
by its top while
it is in use.