Panasonic PT-DZ680EK PT-DZ680EKJ User Manual

Product codes
PT-DZ680EKJ
Page of 17
S
P
E
C
F
I
L
E
PT-DZ680K/DZ680S/DZ680LK/DZ680LS
DLP
Projectors
As of October 2012
SFD12M014
4 / 1 7
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*1 When the 
STANDBY MODE
is set to 
ECO
, network functions such as power on over the LAN network will not operate, and the serial output terminal
cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*4 With legs at shortest position.
*5 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m
to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode)
when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately
20% to protect the projector.
*6 Operation range differs depending on environments.
Supplied accessories
Optional accessories
Zoom lens (0.8–1.0:1)
Zoom lens (1.3 – 1.9:1)
Zoom lens (2.3 – 3.6:1)
Zoom lens (3.6 – 5.4:1)
Zoom lens (5.4 – 8.6:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket
Replacement lamp unit
Replacement filter unit
 Power  cord  (×  1)
(x 2 for DZ680EK/DZ680ES/DZ680ELK/DZ680ELS)
 Power cord security lock (× 1)
Wireless/wired remote control unit (× 1)
Batteries for remote control (R6/AA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
ET-DLE080
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
ET-LAD60A
ET-LAD60AW (Twin Pack)
   ET-EMF300