ZyXEL 202H 91-003-194001B User Manual

P-202H Plus v2 User’s Guide

175

Chapter 17 Menu 2 ISDN Setup

Figure 80   Loopback Test

Your ZyXEL Device supports NetCAPI. NetCAPI is ZyXEL's implementation of CAPI 
(Common ISDN Application Program Interface) capabilities over a network. It runs over DCP 
(Device Control Protocol) developed by RVS-COM.

NetCAPI can be used for applications such as Eurofile transfer, file transfer, G3/G4 Fax, 
Autoanswer host mode, telephony, etc. on Windows 95/98/NT platforms. 

See the NetCAPI chapter for more information regarding CAPI drivers.

Press the [SACEBAR] to select Yes in Edit NetCAPI Setup field in Menu 2 and press 
[ENTER] to go to Menu 2.2 - NetCAPI Setup.

Figure 81   Menu 2.2 NetCAPI Setup 

Setup LoopBack Test ...
Dialing to 40000// ...
Sending and Receiving Data ...
Disconnecting ...
LoopBack Test OK
### Hit any key to continue. ###

                  Menu 2.2 - NetCAPI Setup

Active= No

Max Number of Registered Users= 5
Incoming Data Call Number Matching= Multiple Subscriber Number 
(MSN)

Access List:
  Start IP        End IP          Operation
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  0.0.0.0         0.0.0.0         None
  default                         Both

               Press ENTER to Confirm or ESC to Cancel: