ZyXEL 202H 91-003-194001B User Manual
Product codes
91-003-194001B
P-202H Plus v2 User’s Guide
Chapter 28 System Information and Diagnosis
268
28.4 Diagnostic
The diagnostic facility allows you to test the different aspects of your ZyXEL Device to
determine if it is working properly. Menu 24.4 allows you to choose among various types of
diagnostic tests to evaluate your system, as shown in the following figure.
determine if it is working properly. Menu 24.4 allows you to choose among various types of
diagnostic tests to evaluate your system, as shown in the following figure.
Follow the procedure next to get to Diagnostic:
1 From the main menu, type 24 to open Menu 24 – System Maintenance.
2 From this menu, type 4 to open Menu 24.4 – System Maintenance – Diagnostic.
Figure 167 Menu 24.4 System Maintenance : Diagnostic
The following table describes the diagnostic tests available in menu 24.4 for your ZyXEL
Device and associated connections.
Device and associated connections.
Menu 24.4 - System Maintenance - Diagnostic
ISDN System
1. Hang Up B1 Call 21. Reboot System
2. Hang Up B2 Call 22. Command Mode
3. Reset ISDN
4. ISDN Connection Test
5. Manual Call
1. Hang Up B1 Call 21. Reboot System
2. Hang Up B2 Call 22. Command Mode
3. Reset ISDN
4. ISDN Connection Test
5. Manual Call
TCP/IP
11. Internet Setup Test
12. Ping Host
11. Internet Setup Test
12. Ping Host
Enter Menu Selection Number:
Manual Call Remote Node= N/A
Host IP Address= N/A
Host IP Address= N/A
Table 90 System Maintenance Menu Diagnostic
FIELD
DESCRIPTION
Hang Up B1 Call
This tool hangs up the B1 channel. It is only applicable if the B1 channel is
currently in use.
Hang Up B2 Call
This tool hangs up the B2 channel. It is only applicable if the B2 channel is
currently in use.
Reset ISDN
This command re-initializes the ISDN link to the telephone company.
ISDN Connection Test
You can test to see if your ISDN line is working properly by using this
option. This command triggers the ZyXEL Device to perform a loop-back
test to check the functionality of the ISDN line. If the test is not successful,
note the error message that you receive and consult your network
administrator.