ZyXEL 202H 91-003-194001B User Manual
Product codes
91-003-194001B
P-202H Plus v2 User’s Guide
285
Chapter 30 System Maintenance
30.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.
Figure 190 Valid Commands
30.2 Call Control Support
The ZyXEL Device provides four call control functions: call control parameters, blacklist,
budget management and call history.
budget management and call history.
Call control parameters allows you to set a dial out time limit, the number of times a number
should be called before it is added to the blacklist and the interim between calls.
should be called before it is added to the blacklist and the interim between calls.
The budget management function allows you to set a limit on the total outgoing call time of
the ZyXEL Device over a period of time. When the total outgoing call time exceeds the limit,
the current call will be dropped and any future outgoing calls will be blocked.
the ZyXEL Device over a period of time. When the total outgoing call time exceeds the limit,
the current call will be dropped and any future outgoing calls will be blocked.
The blacklist function prevents the ZyXEL Device from re-dialing to an unreachable phone
number. It is a list of phone numbers, up to a maximum of 14, to which the ZyXEL Device
will not make an outgoing call. If the ZyXEL Device tries to dial to a phone number and fails
a certain number of times (configurable in Menu 24.9.1), then the phone number is placed on
the blacklist. You will have to enable the number manually before the ZyXEL Device will dial
that number again.
number. It is a list of phone numbers, up to a maximum of 14, to which the ZyXEL Device
will not make an outgoing call. If the ZyXEL Device tries to dial to a phone number and fails
a certain number of times (configurable in Menu 24.9.1), then the phone number is placed on
the blacklist. You will have to enable the number manually before the ZyXEL Device will dial
that number again.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System
Maintenance - Call Control, as shown in the next table.
Maintenance - Call Control, as shown in the next table.
Figure 191 Menu 24.9 System Maintenance : Call Control
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
config isdn radius ip
ipsec ppp hdap dcp
ras>
ras> ?
Valid commands are:
sys exit device ether
config isdn radius ip
ipsec ppp hdap dcp
ras>
Menu 24.9 - System Maintenance - Call Control
1. Call Control Parameters
2. Blacklist
3. Budget Management
4. Call History
2. Blacklist
3. Budget Management
4. Call History
Enter Menu Selection Number: