ZyXEL 202H 91-003-194001B User Manual

P-202H Plus v2 User’s Guide

Chapter 32 Call Scheduling

296

Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate 
when a remote node should be called and for how long.

The call scheduling feature allows the ZyXEL Device to manage a remote node and dictate 
when a remote node should be called and for how long. This feature is similar to the scheduler 
in a videocassette recorder (you can specify a time period for the VCR to record). You can 
apply up to 4 schedule sets in Menu 11.1 - Remote Node Profile.  From the main menu, enter 
26 to access Menu 26 - Schedule Setup as shown next. 

Figure 199   Menu 26 Schedule Setup

Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling 
conflicts. For example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will 
take precedence over set 2, 3 and 4 as the ZyXEL Device, by default, applies the lowest 
numbered set first. Set 2 will take precedence over set 3 and 4, and so on.

You can design up to 12 schedule sets but you can only apply up to four schedule sets for a 
remote node.

Note: To delete a schedule set, enter the set number and press [SPACE BAR] and 

then [ENTER] (or delete) in the Edit Name field.

Menu 26 - Schedule Setup

Schedule                        Schedule
  Set #       Name                Set #      Name
------   -------------------     ------  ----------------

1         ______________           7      ______________
2         ______________           8      ______________
3         ______________           9      ______________
4         ______________          10      ______________
5         ______________          11      ______________
6         ______________          12      ______________

Enter Schedule Set Number to Configure= 0

Edit Name= N/A

Press ENTER to Confirm or ESC to Cancel: