ZyXEL 202H 91-003-194001B User Manual
Product codes
91-003-194001B
P-202H Plus v2 User’s Guide
71
Chapter 6 Network Address Translation (NAT) Screens
The following table describes the fields in this screen.
6.6 Configuring Address Mapping
Ordering your rules is important because the ZyXEL Device applies the rules in the order that
you specify. When a rule matches the current packet, the ZyXEL Device takes the
corresponding action and the remaining rules are ignored.
you specify. When a rule matches the current packet, the ZyXEL Device takes the
corresponding action and the remaining rules are ignored.
To change your ZyXEL Device’s address mapping settings, click NAT, select Full Feature
and click Edit Details to open the following screen.
and click Edit Details to open the following screen.
Figure 23 Address Mapping Rules
Table 13 Edit SUA/NAT Server Set
LABEL
DESCRIPTION
Start Port No.
Enter a port number in this field.
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port
number in the End Port No. field.
End Port No.
Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port No. field
To forward only one port, enter the port number again in the Start Port No. field
above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with
To forward a series of ports, enter the last port number in a series that begins with
the port number in the Start Port No. field above.
IP Address
Enter the inside IP address of the server here.
Save
Click Save to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to return to the previous configuration.