Saeco Super-automatic espresso machine HD8763/18 HD8763/18 User Manual
Product codes
HD8763/18
36
ENGLISH
6
This icon is displayed during pre-heating time required by the ma-
chine.
Y
ello
w
Gr
een
7
When the desired amount of milk froth is reached, press the “
” but-
ton.
Now the “milk froth” button is programmed. Every time it is pressed, the
machine will brew the same amount of milk froth that was programmed.
machine will brew the same amount of milk froth that was programmed.
DISPENSING HOT WATER
Warning:
Danger of scalding! Dispensing may be preceded by short sprays of
hot water and steam. Danger of burns! Wait until the end of the cycle
before removing the water dispensing spout.
hot water and steam. Danger of burns! Wait until the end of the cycle
before removing the water dispensing spout.
1
Slightly tilt the water dispensing spout and insert it all the way in into
the guides of the machine.
2
Push the water dispensing spout towards the bottom while rotating at
the same time, until it is locked in the machine as shown in the fi gure.