Panasonic PT-DZ10KE User Manual
As of April 2013
SFD12M023
4 / 1 7
S
P
E
C
F
I
L
E
PT-DZ10K
3-Chip DLP
™
Projector
Remote control unit
Power supply
Operation range*
8
Dimensions (W × H × D)
Weight
Supplied accessories
Optional accessories
Zoom lens (0.9 – 1.1:1)
Zoom lens (1.3 – 1.7:1)
Zoom lens (1.7– 2.4:1)
Zoom lens (2.4 – 4.7:1)
Zoom lens (4.6 – 7.4:1)
Zoom lens (7.3 – 13.8:1)
Fixed-focus lens (0.7:1)
Lens motor cover
Ceiling mount bracket
Frame
Smoke cut filter
Replacement lamp unit
Replacement lamp unit for portrait mode
Replacement filter unit
3 V DC (AA/R6 type battery × 2)
Approx. 30 m (98
5 in) when operated from directly in front of the
signal receptor
51 × 176 × 28 mm (2 × 6-15/16 × 1-3/32 inches)
Approx. 134 g (4.7 oz) (including batteries)
Power cord (×1) (x2 for PT-DZ10KE)
Wireless/wired remote control unit (× 1)
Batteries for remote control (AA/R6 type × 2)
Softwar
Lens drop-prevention screw (× 1)
e CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
ET-D75LE6
ET-D75LE10
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE8
ET-D75LE50
ET-D75MC1
ET-PKD310H (for high ceilings)
ET-PKD310S (for low ceilings)
ET
Attachment for ceiling mount bracket
ET-PAD310
-PFD310
ET
Replacement smoke cut filter
ET-SFR320
-SFD320
ET-LAD310A (one bulb)
ET-LAD310AW (a set of two bulbs)
ET-LAD320P (one bulb)
ET-LAD320PW (a set of two bulbs)
ET-EMF320
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-
nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
*4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*5 With legs at shortest position.
*6 Average value (excluding the optional lens). May differ depending on models.
*7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from
*5 With legs at shortest position.
*6 Average value (excluding the optional lens). May differ depending on models.
*7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from
1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature
range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. The operating temperature range is 0 °C to 40 °C
(32 °F to 104 °F) when the ET-LAD320P/LAD320PW lamp is mounted and the projector is used in portrait configuration. The operating temperature
range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to
8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F
to 86 °F).
range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. The operating temperature range is 0 °C to 40 °C
(32 °F to 104 °F) when the ET-LAD320P/LAD320PW lamp is mounted and the projector is used in portrait configuration. The operating temperature
range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to
8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F
to 86 °F).
*8 Operation range differs depending on environments.