Polycom 2457-26122-001 User Manual
System Commands
Polycom, Inc.
161
preset
Sets the presets or goes (moves) to the presets for the near or far camera source.
Also registers or unregisters the API session to give notification when the user
Also registers or unregisters the API session to give notification when the user
sets or goes to presets.
Syntax
preset <register|unregister>
preset register get
preset far <go|set> <{0..15}>
preset near <go|set> <{0..99}>
preset register get
preset far <go|set> <{0..15}>
preset near <go|set> <{0..99}>
Feedback Examples
•
preset register
returns
preset registered
•
preset near go 1
returns
preset near go 1
and moves the near-site camera to the preset 1 position
and moves the near-site camera to the preset 1 position
Parameter
Description
register
Registers the system to give notification when the user
or far site sets or goes to a preset. Returns the current
preset registration state when followed by the
get
parameter.
unregister
Disables register mode.
far
Specifies the far camera. Requires a
set
or
go
parameter and a preset identifier.
go
Moves the camera to a camera preset. Requires a
“preset”
parameter.
set
Sets a camera preset. Requires a
“preset”
parameter.
{0..15}
,
{0..99}
Camera preset identifier. Must be an integer in the
range
{0..15}
for a far-site camera or
{0..99}
for a
near-site camera.
near
Specifies the near camera. Requires a
set
or
go
parameter and a preset identifier.