Polycom 2457-26122-001 User Manual
Polycom, Inc.
41
3
Using the API
The Application Programming Interface (API) is a set of commands for
advanced users who want to automate a Polycom RealPresence Group system.
You can use the API by connecting a control system or computer RS-232 serial
port to a Polycom RealPresence Group system. You can also use Telnet over
the LAN to use the API with Polycom RealPresence Group systems.
advanced users who want to automate a Polycom RealPresence Group system.
You can use the API by connecting a control system or computer RS-232 serial
port to a Polycom RealPresence Group system. You can also use Telnet over
the LAN to use the API with Polycom RealPresence Group systems.
Using the API with an RS-232 Interface
If you use an RS-232 interface to send API commands, you must connect and
configure the control system or computer and the Polycom RealPresence
Group system for serial communication.
configure the control system or computer and the Polycom RealPresence
Group system for serial communication.
Configuring the RS-232 Interface
If you use the API with a serial connection, make sure that the RS-232
interfaces of the Polycom RealPresence Group system and your computer are
configured appropriately.
To access the RS-232 settings on your system, go to Admin Settings > General
interfaces of the Polycom RealPresence Group system and your computer are
configured appropriately.
To access the RS-232 settings on your system, go to Admin Settings > General
Settings > Serial Port from the web interface.