Avaya Integral 5 Easy BND AR2.X 4999108488 User Manual

06/07

226

4.999.112.593

Installation manual Integral 5 D/E easy

Commissioning

 Before starting up the system, ensure that the mains socket to which the system is connected 

 

    is at 230 V AC.

 Observe the instructions in the section on earthing
 Insert the common multi-socket extension (with the plugs of the units inserted) 

 

    into the appropriate mains socket or switch multi-socket extension on

 The operating software is loaded.

Warm start the PABX Integral 5 as follows:

   Use either ISA or    Terminal code

 Unplug the common multi-socket extension

 

 Wait approx. 15 seconds and plug the common multi-socket extension in again

 Remove the cover of PB1 (open PB1) 

 

 Disconnect the (battery) low-profile plug

 

 Unplug the common multi-socket extension

 

 Wait approx. 15 seconds and plug the common multi-socket extension in again

 

 Reconnect the (battery) low-profile plug

 

 

 The system will start up with the customer data