Panasonic KX-TS600W, White KX-TS600EXW User Manual

If “

” flashes, the battery power is low. Install new batteries as soon as 

possible. If batteries are not replaced even after the “

” is displayed, the 

unit may not work properly.

• Store the desired items in the Phonebook or Direct Dial memory, because after 

the battery replacement, the information stored in the Redial List will be cleared.

1

Disconnect the telephone line 
cord from the unit.

2

Press down in the direction of the 
arrow and open the cover (

1).

3

Replace the batteries with new 
ones using correct polarity (+, –) 
(

2), and close the cover.

4

Connect the telephone line cord 
to the unit.

• The time will be shown as “

12:00AM 12/31”  or  “0:00 12/31”  and “

” will 

flash after replacing the batteries, readjust the time and date.

The batteries should be used correctly, otherwise the unit may be damaged by 
battery leakage.
— Do not mix different types of batteries.
— Do not charge, short-circuit, disassemble, heat or dispose of in fire.
— Remove all the batteries when replacing.

— If you do not install the batteries or if the battery power is low, the time will be 

shown as “

12:00AM 12/31”  or  “0:00 12/31”  and “

” will flash. 

Readjust the time after the battery replacement.

— Replace all the batteries every six months if using Alkaline batteries, or 

misoperation may occur. (When you use Manganese batteries, replace all of 
them every three months.)

— Do not use nickel-cadmium batteries.

TS600W.book  Page 44  Friday, October 28, 2005  2:10 PM