Panasonic PT-TW240U User Manual

Model

PT-TW331R

PT-TW330

PT-TW240

PT-TX301R

PT-TX300

Power supply

100−240 V AC, 50/60 Hz

Power consumption

301 W

(0.5 W when STANDBY MODE set to ECO,*

6.0 W when STANDBY MODE set to NORMAL.*

)

254 W

(0.5 W when STANDBY MODE set to ECO,*

6.0 W

when STANDBY MODE set to NORMAL.*

)

301 W

(0.5 W when STANDBY MODE set to ECO,*

6.0 W when STANDBY MODE set to NORMAL.*

)

DLP™
chip

Panel size

16.5 mm (0.65 inches) (16:10 aspect ratio)

14 mm (0.55 inches) (4:3 aspect ratio)

Display method

DLP™ chip x 1 DLP™ system

Pixels

1,024,000 (1,280 x 800) pixels

786,432 (1,024 x 768) pixels

Lens

Fixed(0.521:1 Throw ratio), manual focus, F 2.8, f 7.51mm

Fixed(0.626:1 Throw ratio), manual focus, F 2.8, f 7.26mm

Lamp

240 W UHM lamp

190 W UHM lamp

240 W UHM lamp

Lamp replacement cycle
(Normal / Eco / AUTO)

3,000 / 4,000 (Eco1,Eco2) / 7,500 hours*3

4,000 / 6,000 / 8,500 hours*3

3,000 / 4,000 (Eco1,Eco2) / 7,500 hours*3

Screen size (diagonal)

1.14 – 5.72 m (45 – 225 inches), 16:10 aspect ratio

1.02 – 5.08 m (40 – 200 inches), 4:3 aspect ratio

Brightness*

3,100 lm

2,700 lm

3,000 lm

Center-to-corner uniformity*

80%

Contrast*

7,500 : 1 (full on/off)(During RGB signal input, Color mode : Dynamic, Lamp power:AUTO)

Resolution

1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)

1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)

Optical axis shift

10:-1.2

10:-1.5

Scanning
frequency

HDMI

: 15 kHz – 91.1 kHz, f

: 24 Hz –85.1 Hz, dot clock: 25 MHz –162 MHz

RGB (analog)

: 15 kHz – 91.1 kHz, f

: 24 Hz –85.1 Hz, dot clock: 162 MHz or lower

(YC

)

: 15.75 kHz, f

: 60 Hz [480i(525i)],

: 15.63 kHz, f

: 50 Hz [576i(625i)],

: 31.50 kHz, f

: 60 Hz [480p(525p)],

: 31.25 kHz, f

: 50 Hz [576p(625p)],

: 45.00 kHz, f

: 60 Hz [720(750)/60p],

: 37.50 kHz, f

: 50 Hz [720(750)/50p],

: 33.75 kHz, f

: 60 Hz [1080(1125)/60i],

: 28.13 kHz, f

: 50 Hz [1080(1125)/50i],

: 27.00 kHz, f

: 24 Hz [1080(1125)/24p], f

: 67.50 kHz, f

: 60 Hz [1080(1125)/60p],

: 56.25 kHz, f

: 50 Hz [1080(1125)/50p]

Video

: 15.75 kHz, f

: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] f

: 15.63 kHz, f

: 50 Hz [PAL/PAL-N/SECAM]

Keystone correction range

Vertical: ±40° (manual)

Installation

Ceiling/fl oor, front/rear

Terminals

HDMI IN

HDMI 19-pin x 1 (Deep color, compatible with HDCP) Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)

COMPUTER 1 IN

D-sub HD 15-pin (female) x 1 [RGB/YPB(C

)/PR(C

) x 1]

COMPUTER 2 IN

D-sub HD 15-pin (female) x 1 [RGB/YPB(C

)/PR(C

) x 1]

MONITOR OUT

D-sub HD 15-pin (female) x 1 (The signal selected from computer input 1/2 is output.)

VIDEO IN

Pin jack x 1

SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

AUDIO 1 IN

M3 x 1 (L-R x 1) (for Computer)

AUDIO 2 IN

M3 x 1 (L-R x 1) (for VIDEO)

AUDIO OUT

M3 x 1 (L-R x 1) (variable)

LAN

RJ-45 × 1 (for network connection, 100BASE-TX/10BASE-T, compliant with PJLink™ (class 1))

Mini USB

1 (for Interactive function)

–

1 (for Interactive function)

–

Built-in speaker

7 cm x 4 cm Oval x1 output power 8 W (Monaural)

Cabinet materials

Molded plastic (PC)

Dimensions (W × H × D)

288 x 106*

x 270.5 mm

(11-11/32" x 4-3/16" x 10-21/32)

288 x 100*

x 246*

mm (11-11/32” x 3-15/16” x 9-11/16)

288 x 106*

x 270.5 mm

(11-11/32" x 4-3/16" x 10-21/32)

288 x 100*

x 246*

(11-11/32” x 3-15/16” x 9-11/16)

Weight

Approx.2.7 kg (6 lbs)*

Approx.2.5 kg (5.5 lbs)*

Approx.2.7 kg (6 lbs)*

Approx.2.5 kg (5.5 lbs)*

Noise level

37 dB (Lamp power: Normal); 32 dB (Lamp power: Eco1);

29 dB (Lamp power: Eco2)

35 dB (Lamp power: Normal);

29 dB (Lamp power: Eco)

37 dB (Lamp power: Normal); 32 dB (Lamp power: Eco1);

29 dB (Lamp power: Eco2)

Operating environment

Operating temperature: 5°C – 40°C(41°F – 104°F) [Less than 750 m (2,500 ft) above sea level]; 5°C – 35°C(41°F – 95°F) [750 – 1,500 m (2,500 – 5,000 ft) above sea level]];

5°C – 30°C(41°F – 86°F) [1,500 – 3,000 m(5,000 – 10,000 ft) above sea level]

Operating humidity: 20% – 80% (no condensation)

Supplied accessories

Power cord (3 m) x 1*

, Wireless remote control unit x 1,

Lithium coin cell battery x 1,

Computer cable (1.8m) x 1, Interactive pen x 2,
Batteries (AAA type x 4), USB cable (5.0 m) x 1,
Application software (Light Pen 3) CD-ROM x 1

Power cord (3 m) x 1*

, Wireless remote control unit x 1,

Lithium coin cell battery x 1, Computer cable (1.8m) x 1

Power cord (3 m) x 1*

, Wireless remote control unit x 1,

Lithium coin cell battery x 1,

Computer cable (1.8m) x 1, Interactive pen x 2,
Batteries (AAA type x 4), USB cable (5.0 m) x 1,
Application software (Light Pen 3) CD-ROM x 1

Power cord (3 m) x 1*

Wireless remote control unit x 1,

Lithium coin cell battery x 1,

Computer cable (1.8m) x 1

Weights and dimensions shown are approximate. Specifi cations and appearance are subject to change
without notice. Product availability differs depending on region and country. This product may be subject
to export control regulations. The projection distances and throw ratios given in this brochure are for
use only as guidelines. For more detailed information, please consult the dealer from whom you are
purchasing the product. The PJLink trademark is an application trademark in Japan, the United States,
and other countries and regions or registered trademarks. Windows

are either registered trademarks

or trademarks of Microsoft Corporation in the United States and/or other countries. DLP™ (Digital
Light Processing), DLP™ Chip, DLP Medallion Logo and DLP

Link™ are trademarks or registered

trademarks of Texas Instruments. HDMI, the HDMI logo and High-Defi nition Multimedia Interface is a
trademark or registered trademark of HDMI Licensing LLC. Crestron Connected is a registered trademarks
of Crestron Electronics, Inc. All other trademarks are the property of their respective trademark owners.
Projection images simulated. © 2013 Panasonic Corporation. All rights reserved.

PT-TW330G1 Printed in Japan.

All information included here is valid as of

September 2013.

*1 When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [Off].
*2 When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all set to [On].
*3 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25

hours. If the lamp is turned on more times or kept on for a long time, the lamp
replacement cycle will shorten. The usage environment affects the duration of
the lamp.

*4 Measurement, measuring conditions, and method of notation all comply with

ISO 21118 international standards.

*5 With legs at shortest position.
*6 With lens at shortest position.
*7   The above values are averages. Actual values may be different according to the product.
*8   Power code (x2) for the PT-TW331REA/TW330EA/TW240EA/TX301REA/TX300EA.
*9   This product is used together with an optional bracket attachment (sold separately).
*10 The Interactive Pen is the same as those which are supplied with PT-TW331R/TX301R.

Optional accessories

Ceiling mount
bracket
for high ceilings*

ET-PKV100H

Ceiling mount
bracket
for low ceilings*

ET-PKV100S

Replacement lamp unit
ET-LAL341

*Exclusively for
PT-TW331R/TW330/
TX301R/TX300

Interactive pen*

ET-PEN100

*Exclusively for
PT-TW331R/TX301R

Attachment for ceiling
mount bracket
ET-PKL300B

Replacement lamp unit
ET-LAL331

*Exclusively for
PT-TW240

Interactive pointer
ET-PNT100

*Exclusively for
PT-TW331R/
TX301R

Specifi cations

Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fi re, malfunction or electric shock.

Caution

1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping

sound, or fail to illuminate, due to impact or extended use.

2  The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
  • Never place objects on top of the projector while it is in operation.
  • Make sure there is an unobstructed space of 1,000 mm(3 ft 3 in) or more around the projector’s exhaust openings.
  • If stacking projector units, care must be taken to provide the recommended space between units. These space

requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.

• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the

operating temperature listed in the specifi cations table during use. Also, make sure the projector’s intake and exhaust
openings are not blocked. Ensure there is suffi cient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.

3  The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
  • The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
  • The brightness of the lamp will gradually decrease with use.
4  Due to natural characteristics of lamps, screen brightness may fl uctuate. This is not an indication of faulty lamp performance.

NOTE ON USE

For more information about Panasonic projectors, please visit

Projector Global Web Site – panasonic.net/avc/projector