Sanyo EDUCATION PROJECTOR PLC-XE31LMP PLC-XE31LMP User Manual
Product codes
PLC-XE31LMP
14
✔
Note:
• The brightness in the room has a great influence on picture quality.
It is recommended to limit the ambient lighting in order to get the best image.
• The values below are approximate and may vary from the actual sizes.
100”
150”
200”
(wide)300”
250”
166”
126”
83”
40”
A
(tele)300”
B
36.1' (11.0m)
23.9' (7.3m)
18.0' (5.5m)
11.8' (3.6m)
Max. Zoom
Min. Zoom
A : B = 10 : 1
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (min)
40”
Zoom (max)
813 x 610
5.6' (1.7m)
4.6' (1.4m)
100”
2032 x 1524
14.4' (4.4m)
11.8' (3.6m)
150”
3048 x 2286
21.7' (6.6m)
18.0' (5.5m)
200”
4064 x 3048
28.9' (8.8m)
23.9' (7.3m)
300”
6096 x 4572
43.3' (13.2m)
36.1' (11.0m)
(Inch Diagonal)
4.6' (1.4m)
For projector positioning, see the figures below.
The projector should be set horizontally to the flat screen.
The projector should be set horizontally to the flat screen.
(Center)
Projection angle can be adjusted up to 10.0 degrees with
the adjustable feet.
the adjustable feet.
Lift the front of the projector and pull upward the feet
lock latches on both sides of the projector.
lock latches on both sides of the projector.
1
Adjustable Feet
Feet Lock Latches
Release the feet lock latches to lock the adjustable
feet and rotate the adjustable feet to adjust the
position and tilt.
feet and rotate the adjustable feet to adjust the
position and tilt.
2
To retract the adjustable feet, lift the front of the
projector and pull and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected by menu operation. (pp. 23, 42)
projector and pull and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected by menu operation. (pp. 23, 42)
3
Adjustable Feet
Positioning the Projector
Installation
43.3' (13.2m)