Sanyo EDUCATION PROJECTOR PLC-XE31LMP PLC-XE31LMP User Manual
Product codes
PLC-XE31LMP
6
Safety Instructions
USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the
projector through a courier or transport service, consult
your dealer for their information.
–Do not put the projector in a case before the projector
is cooled enough.
or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by using a courier or
transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the
projector through a courier or transport service, consult
your dealer for their information.
–Do not put the projector in a case before the projector
is cooled enough.
Moving the Projector
When moving the projector, replace the lens cover and
retract the adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case to protect
the projector.
When handling the projector, do not drop, bump,
subject it to strong forces or put other things on the
cabinet.
retract the adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case to protect
the projector.
When handling the projector, do not drop, bump,
subject it to strong forces or put other things on the
cabinet.
Do not tilt the projector more than
20 degrees from side to side.
20 degrees from side to side.
Do not point the projector up to
project an image.
project an image.
Do not point the projector down
to project an image.
to project an image.
Do not put the projector on either
side to project an image.
side to project an image.
Install the projector properly. Improper Installation may
reduce the lamp life and cause a fire hazard.
reduce the lamp life and cause a fire hazard.
Installing the Projector
in Proper Position
Openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to
protect it from overheating, and these openings must
not be blocked or covered.
to ensure reliable operation of the product and to
protect it from overheating, and these openings must
not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
using or installing the projector, the following
precautions should be taken.
–
Do not put any flammable object or spray can near
the projector, hot air is exhausted from the ventilation
holes.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the cabinet. The materials
put on the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans' running speed is changed according to the
temperature inside the projector.
holes.
– Keep the exhaust vent at least 3’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the cabinet. The materials
put on the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans' running speed is changed according to the
temperature inside the projector.
Air Circulation
20˚
20˚
Air Intake
Vent
Exhaust Vent
Exhaust Vent
(Hot air exhaust)
(Hot air exhaust)
Air Intake
Vent